Pocket deletes hole face

[nor500]

Hello,

What can cause that a pocket operation deletes the hole face of a body instead of just creating the pocket determined by an fully constrained sketch?

Thanks for your help!

[chrisb]

Hi and welcome to the forum!

There is a whole bunch of possible reasons, such as coplanar issues, fillet problems in previous steps. Upload your file and we may say more.

[nor500]

Thank you. I am uploading the project. The problematic body is in the "Case_front001 body" under Case_front part.
Steps to reproduce the problem. Make any sketch on XZ plane pad or pocket won`t work. I had to delete neary all other parts from the project, because it was bigger than the 1.46Mb upload limit.
Thank you in advance

[Shalmeneser]

...

What is your version (look at the pink banner of the help forum) ?

[Shalmeneser]

No constraints on first sketches ?
Problem with version ? (me 0.20 weekly)

Code: Select all

20:04:32  <PropertyLinks> PropertyLinks.cpp(779): Lost link to airq_sensor_case_v5_led_holder_testing_new Import002 while loading, maybe an object was not loaded correctly
20:04:32  <PropertyLinks> PropertyLinks.cpp(779): Lost link to airq_sensor_case_v5_led_holder_testing_new Import003 while loading, maybe an object was not loaded correctly
20:04:32  <PropertyLinks> PropertyLinks.cpp(779): Lost link to airq_sensor_case_v5_led_holder_testing_new Import005 while loading, maybe an object was not loaded correctly
20:04:32  <PropertyLinks> PropertyLinks.cpp(779): Lost link to airq_sensor_case_v5_led_holder_testing_new Import006 while loading, maybe an object was not loaded correctly
20:04:32  <PropertyLinks> PropertyLinks.cpp(779): Lost link to airq_sensor_case_v5_led_holder_testing_new Import while loading, maybe an object was not loaded correctly
20:04:32  <PropertyLinks> PropertyLinks.cpp(779): Lost link to airq_sensor_case_v5_led_holder_testing_new Import021 while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import003' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import003' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import003' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import002' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import003' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import003' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import003' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import003' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import002' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import006' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import006' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import006' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import006' while loading, maybe an object was not loaded correctly
20:04:32  Lost link to 'Import021' while loading, maybe an object was not loaded correctly
20:04:32  SketchObject::onChanged(): Unmanaged change of Constraint Property results in invalid constraint indices
20:04:32  SketchObject::onChanged(): Unmanaged change of Constraint Property results in invalid constraint indices
20:04:32  SketchObject::onChanged(): Unmanaged change of Constraint Property results in invalid constraint indices
20:04:32  SketchObject::onChanged(): Unmanaged change of Constraint Property results in invalid constraint indices

[nor500]

I am using realthunder branch 2021.10.15 (Freecad 0.19.1). The first sketch is fully constrained.

[Shalmeneser]

I am using realthunder branch 2021.10.15 (Freecad 0.19.1). The first sketch is fully constrained.

I can't do nothing to you.
I don't use Realthunder branch and your file doesn't open rightly on my computer.

You should always tell us your version.

[chrisb]

I am using realthunder branch 2021.10.15 (Freecad 0.19.1).

You should have said that earlier to save considerable time from all the helpers who looked at your issue. Opening a realthunder model in master can produce arbitrary wrong or right results. Such issues can be reported on realthunder's github account or in the Assembly forum.
I move the topic there. It's all I can do.