Assembly3 preview
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Assembly3 preview
I think it would.be a good idea to oOpen a new thread in the help section and follow the thread linked in the big red banner at the top. The later is missing for sure
Regards / Viele Grüße
Max
Max
Re: Assembly3 preview
Link to my initial question
What Zolko proposed sounded very nice to me and, as you can see, I succeeded using Draft_PolarArray instead of Draft_CircularArray. I've attached my file with both ASM3 solutions to this post.
If you really meant Draft_CircularArray, I'd like to see an example of how I should've used it.
Nevertheless, thank you very much to both of you! I really appreciate it!
edit: Added a screenshot of the object tree
I wasn't able to get something useful out of Draft_CircularArray but Draft_PolarArray looks good!realthunder wrote: ↑Sun Jul 11, 2021 6:57 am There are other ways, but probably not better in comparison. If you are using my release, the PartDesign there allows you to create multiple solid that are independent with each other. So you can just make a new solid with another polar pattern on the pocket feature, which will give you three cylinders.
You can also create the element with the sketch, and manually adjust the element's Offset property to move it to the other hole. And then create another one, do the same.
Or just do what Zolko says, using a draft polar array, but that require you to wrap the array and the body into a sub assembly before use.
What Zolko proposed sounded very nice to me and, as you can see, I succeeded using Draft_PolarArray instead of Draft_CircularArray. I've attached my file with both ASM3 solutions to this post.
If you really meant Draft_CircularArray, I'd like to see an example of how I should've used it.
Nevertheless, thank you very much to both of you! I really appreciate it!
edit: Added a screenshot of the object tree
- Attachments
-
- cylinder_align_screws_holes_Asm3_M4x_2.FCStd
- Example with both ASM3 solutions
- (197.93 KiB) Downloaded 125 times
Regards / Viele Grüße
Max
Max
Re: Assembly3 preview
Hi,
I think there is a regression in both last stable and daily release. If a Body is contained in an Assembly I cannot select anything without getting "Cyclic reference" error.
I think there is a regression in both last stable and daily release. If a Body is contained in an Assembly I cannot select anything without getting "Cyclic reference" error.
Edit: Another interesting issue. In the attached file Pockets become an additive feature after editing them.OS: Ubuntu Impish Indri (development branch) (KDE/plasma)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 2021.911.24301 +3846 (Git) AppImage
Build type: Release
Branch: LinkStage3
Hash: 426a333ced22218ed5f06ca8bb7e63ea8042fc2d
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.1
OCC version: 7.5.2
Locale: Polish/Poland (pl_PL)
-
- Veteran
- Posts: 2190
- Joined: Tue Jan 03, 2017 10:55 am
Re: Assembly3 preview
Should have been fixed in 0916 release. Please check. Also in the future, it would be better to report the problem in github issue page. Thanks.
Re: Assembly3 preview
Will do. It is fixed, Thank you.realthunder wrote: ↑Tue Sep 21, 2021 1:29 am Also in the future, it would be better to report the problem in github issue page. Thanks.
Re: ASM3 BOM
Tell me which field insert the script from the https://github.com/realthunder/FreeCAD_ ... onstration to get this table?HelloWorldXD wrote: ↑Fri Jul 30, 2021 1:57 pm Hello,
mabye someone could help me please.
I dont get it what is wrong it always says that i dont have acess to B1?
thanks
Re: Assembly3 preview
Dear realthunder,
Is there a way to redefine a broken Element? Currently in Combo-View under Link->Linked object the button 'change linked object' is 'grayed-out'/disabled.
It would help a lot if one could redefine the linked face/element after faces were messed up with topo-renaming-problems!
BR,
Howil
using your stable link branch 10.15
Is there a way to redefine a broken Element? Currently in Combo-View under Link->Linked object the button 'change linked object' is 'grayed-out'/disabled.
It would help a lot if one could redefine the linked face/element after faces were messed up with topo-renaming-problems!
BR,
Howil
using your stable link branch 10.15
Re: Assembly3 preview
Should be very simple - select new feature(face, line etc) that you wish to use.
It gets highlighted on the tree view - drag the highlighted item to the "broken element".
All done...
Re: Assembly3 preview
Dear bambuko, thank you very much .... worked like a charm. I did see this for creation of Elements (Edit: I personally use the shortcut A E) but did not know that a similar procedure could be used to fix elements.
Nevertheless, is there a reason why the 'change linked object' is 'grayed-out'/disabled for me the combo-view is the intuitive way (oldschool maybe).
Re: Assembly3 preview
You are welcome!
Sorry, don't quite follow you about "change linked object"
Any chances of screen grab pointing to what you are trying to do?