Have a look at the wiki
https://www.freecadweb.org/wiki/A2plus_Workbench
Actually, I searched for the problem before, also did an look at the wiki (because often it's the first result), but don't understand this problem yet, sorry!!easyw-fc wrote: ↑Wed Jul 24, 2019 5:38 amHave a look at the wiki
https://www.freecadweb.org/wiki/A2plus_Workbench
I'm not sure what you mean by convert.
When I insert a part file I have often opened the file, made changes and updated the assembly using the update button. The part file must be saved to the disk, apparently the update button reads from the files saved to the disk not the files in memory.
not a bad idea at all, inserting (improving) the library macro in the workbench to quickly import objs is a really good nice to have feature.jbe wrote: ↑Sat Oct 19, 2019 1:07 pm Hello kbwe,
Could you add a new button to open the FreeCAD library, then we select a part, an after use A2Plus to assembly this part. May be we can parameter when is the library.
The adress off library is :
https://github.com/FreeCAD/FreeCAD-library
Best regard.