OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16110 (Git)
Build type: Release
Branch: (HEAD detached at upstream/releases/FreeCAD-0-18)
Hash: f7dccfaa909e5b9da26bf50c4a22ccca9bb10c40
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedKingdom (en_GB)
Apologies if this appears to be a stupid question guys, In the assembly2 workbench in FC V0.16 there is the facility to check for assembly overlaps indicated in .JPG snip.
Where is this function/tool in assembly2 plus V0.4.23, is it under a different name ?
Assembly WB A2plus V0.4.23 question
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Assembly WB A2plus V0.4.23 question
- Attachments
-
- A2_overlapd_check.JPG (48.63 KiB) Viewed 1472 times
Re: Assembly WB A2plus V0.4.23 question
Hi @un1corn,
you cannot find this function, as it is not implemented. I am not quite sure, but i fear it will not come because there are some difficulties of converting shells to solids, what would be necessary for proper function IMHO.
KBWBE
https://github.com/kbwbe/A2plus
latest release: v0.4.56, installable via FreeCAD's addon manager
Tutorial: gripper assembly https://www.youtube.com/watch?v=QMxcQ5tssWk
Documentation: https://www.freecadweb.org/wiki/A2plus_Workbench
https://github.com/kbwbe/A2plus
latest release: v0.4.56, installable via FreeCAD's addon manager
Tutorial: gripper assembly https://www.youtube.com/watch?v=QMxcQ5tssWk
Documentation: https://www.freecadweb.org/wiki/A2plus_Workbench
Re: Assembly WB A2plus V0.4.23 question
Thanks for your comment KBWBE, I thought it was my newness to A2+ that I couldn't find something that is not there.
Although probably not the right thing to do, I tried a check using Assembly2 WB from FC V0.16 with a small number of components and although it throws up an error at the start it did seem to work, I will try on a larger assembly when I get there and will post the results.
Although probably not the right thing to do, I tried a check using Assembly2 WB from FC V0.16 with a small number of components and although it throws up an error at the start it did seem to work, I will try on a larger assembly when I get there and will post the results.
Re: Assembly WB A2plus V0.4.23 question
As previously posted, here is a slightly larger assembly file of a tipping wagon although created and assembled with A2+ in V0.18 I ran the Assembly2 WB wich gives an initial error when selected however still seems to do an overlap check successfully as can be seen in attached images.
Hope this might be of use to other users.
Hope this might be of use to other users.
- Attachments
-
- Assembly check 1.JPG (151.92 KiB) Viewed 1422 times
-
- Assembly check 2.JPG (173.26 KiB) Viewed 1422 times
Re: Assembly WB A2plus V0.4.23 question
Just a thought: Had you tried to intentionally create an overlap and test if it is catched by that test?
Re: Assembly WB A2plus V0.4.23 question
Yes, in fact I did have several overlaps which it caught and I rectified, perhaps I should have included the failures also..........
Re: Assembly WB A2plus V0.4.23 question
I thought it prudent to include a detected overlap achieved by displacing the axle by Z-0.1mm just to show A2 WB works with A2+ assembly if required.
- Attachments
-
- Overlap detedted.JPG (117.64 KiB) Viewed 1366 times
Re: Assembly WB A2plus V0.4.23 question
Moved to Assembly forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.