[A2plus] Coincident constraint for cylindrical and plane face

Discussion about the development of the Assembly workbench.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
ascaron
Posts: 15
Joined: Sat Jun 01, 2019 3:59 pm

[A2plus] Coincident constraint for cylindrical and plane face

Post by ascaron »

Howdy! Is it somehow possible to make a coincident constraint for a cylindrical and a plane face in A2plus?
I attached a screenshot with the faces marked I want to be coincident.
conincident.png
conincident.png (30.51 KiB) Viewed 3186 times
Edit:
OS: Manjaro Linux (dwm/dwm)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.17359 (Git)
Build type: Release
Branch: master
Hash: 4617e5484ac21932dfa6797dc2575a64154f590d
Python version: 3.7.3
Qt version: 5.13.0
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)
A2plus: V0.4.25
chrisb
Veteran
Posts: 53919
Joined: Tue Mar 17, 2015 9:14 am

Re: [A2plus] Coincident constraint for cylindrical and plane face

Post by chrisb »

Moved to Assembly subforum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
catman
Posts: 412
Joined: Fri Jan 11, 2019 10:42 pm

Re: [A2plus] Coincident constraint for cylindrical and plane face

Post by catman »

ascaron wrote: Sun Jul 14, 2019 3:06 pm Howdy! Is it somehow possible to make a coincident constraint for a cylindrical and a plane face in A2plus?
+1

I had been looking for a 'tangential' constraint quite a few times. I think that's the same, just a different wording.
Slidingvane
Posts: 7
Joined: Sat Sep 18, 2021 5:42 pm

Re: [A2plus] Coincident constraint for cylindrical and plane face

Post by Slidingvane »

ascaron wrote: Sun Jul 14, 2019 3:06 pm Howdy! Is it somehow possible to make a coincident constraint for a cylindrical and a plane face in A2plus?
I attached a screenshot with the faces marked I want to be coincident.
conincident.png

Edit:
OS: Manjaro Linux (dwm/dwm)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.17359 (Git)
Build type: Release
Branch: master
Hash: 4617e5484ac21932dfa6797dc2575a64154f590d
Python version: 3.7.3
Qt version: 5.13.0
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)
A2plus: V0.4.25
Hi Ascaron, did you find a solution for you problem ? I am facing a similar issue.
Thanks
bf5man
Posts: 6
Joined: Fri Feb 12, 2021 2:35 am
Location: Québec, Canada

Re: [A2plus] Coincident constraint for cylindrical and plane face

Post by bf5man »

Here's how you can do it:
  1. Select the circular edge on the cylinder and select one face on the V
  2. Select the pointOnPlane contraint and set the offset to the cylinder's radius
  3. Redo the steps for the other V face
  4. Redo the steps for the other cylinder end
Attachments
mate.PNG
mate.PNG (55.01 KiB) Viewed 2245 times
Post Reply