Starting a Drawing
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Starting a Drawing
I have an assembly modeled that I now want to go into the shop and start building. Parts are made using Part Design and the assembly is made using A2plus. I'm not finding it intuitive how to get a drawing started for either a part or the assembly. Are there tutorials that will help me get started making drawings of my parts and assembly?
Re: Starting a Drawing
Moved to Assembly forum.
Usually you use the TechDraw workbench to create technical drawings of your model. I don't know how good this works with A2plus together, thus moving to this forum.
Usually you use the TechDraw workbench to create technical drawings of your model. I don't know how good this works with A2plus together, thus moving to this forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Starting a Drawing
Always add the important information to your posts if you need help. Also see Tutorials and Video tutorials.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.