How do i create a hinge in A2Plus?

Discussion about the development of the Assembly workbench.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
Merlin_v2.0
Posts: 10
Joined: Wed Sep 01, 2021 9:25 pm

How do i create a hinge in A2Plus?

Post by Merlin_v2.0 »

[FreeCad 0.19, A2plus V0.4.54b]
I have created a hole and a pole on my two objects.
I have set the pole object to stationary.
i have added a axisParallel, axisCoincident and Plane coincident constraint. I have also tried circularEdge.

When i try to "move the part under rule of constraints" it only moves about the play of the hinge but it doesn't Rotate.

How do i make a simple hinge correctly?
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: How do i create a hinge in A2Plus?

Post by chrisb »

Moved to Assembly forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
dan-miel
Posts: 391
Joined: Thu Sep 13, 2018 12:29 am
Location: Spokane WA. USA

Re: How do i create a hinge in A2Plus?

Post by dan-miel »

Merlin_v2.0 wrote: Wed Sep 01, 2021 9:41 pm I have created a hole and a pole on my two objects.
I have set the pole object to stationary.
I normaly think of a hinge as three parts. Can you upload your model?
Thanks
Dan
superkoira
Posts: 1
Joined: Tue Dec 13, 2022 5:22 pm

Re: How do i create a hinge in A2Plus?

Post by superkoira »

maybe look at this video, it helped me:

https://www.youtube.com/watch?v=5yBqe6eSgfk
Post Reply