Realthunder branch - Importing Part in A2plus keeps crashing
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Realthunder branch - Importing Part in A2plus keeps crashing
FreeCAD crashed for like 4 times when I imported the parts in A2plus workbench. Sometimes it also shows this window prompt after re-opening it. Does anyone know what's causing this? I tried assembling this file in the default branch a few weeks ago and never encountered any crashing.
Re: Realthunder branch - Importing Part in A2plus keeps crashing
Moved from Help forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Realthunder branch - Importing Part in A2plus keeps crashing
@a_0801
How about sharing your FreeCAD file?
I could try and see if the problem repeats for me as well?
How about sharing your FreeCAD file?
I could try and see if the problem repeats for me as well?
Re: Realthunder branch - Importing Part in A2plus keeps crashing
Hi! Sure. Here is the assembly file and some of its parts:
Re: Realthunder branch - Importing Part in A2plus keeps crashing
Let's start with "the window prompt"
I am guessing
(because you didn't follow the instruction the big red banner at the top,see: https://forum.freecadweb.org/viewtopic.php?f=3&t=2264)
that you (or whoever) have created the files in Master branch and now you are trying to open them in Link branch?
In which case the prompt is perfectly normal - there are differences between the two branches
and importing/migrating from Master to Link requires re-computation.
Sometime it fails...
Now, specially for you I have installed A2Plus (I don't use it) and .....
Everything opens perfectly fine with no drama or crashes,
so
let's start at the beginning,
what are you using (follow the instructions form the link - above)
It should look something like this:
I am guessing
(because you didn't follow the instruction the big red banner at the top,see: https://forum.freecadweb.org/viewtopic.php?f=3&t=2264)
that you (or whoever) have created the files in Master branch and now you are trying to open them in Link branch?
In which case the prompt is perfectly normal - there are differences between the two branches
and importing/migrating from Master to Link requires re-computation.
Sometime it fails...
Now, specially for you I have installed A2Plus (I don't use it) and .....
Everything opens perfectly fine with no drama or crashes,
so
let's start at the beginning,
what are you using (follow the instructions form the link - above)
It should look something like this:
Code: Select all
OS: Ubuntu Core 20 (Pantheon/pantheon)
Word size of FreeCAD: 64-bit
Version: 2023.130.14555 (Git shallow)
Build type: Release
Branch: (HEAD detached at 2023.01.30-edge)
Hash: 853a80f93e851db61154996cde61ebec4508e6bc
Python version: 3.8.10
Qt version: 5.15.5
Coin version: 4.0.1
OCC version: 7.6.3
Locale: English/United Kingdom (en_GB)
Re: Realthunder branch - Importing Part in A2plus keeps crashing
As said by other, but maybe it is not clear as it is buried in a log post. (Not to blame the poster, only to give a "relatively" short answer)
RT branch and FreeCAD has no 100% compatibility between files, it is clearly stated somewhere, so your mileage may vary.
Regards
Carlo D.
GitHub page: https://github.com/onekk/freecad-doc.
- In deep articles on FreeCAD.
- Learning how to model with scripting.
- Various other stuffs.
Blog: https://okkmkblog.wordpress.com/
- In deep articles on FreeCAD.
- Learning how to model with scripting.
- Various other stuffs.
Blog: https://okkmkblog.wordpress.com/