Re: pot purri of path issues

Discussions about the wiki documentation of FreeCAD and its translation.
User avatar
Posts: 295
Joined: Sat Jun 30, 2018 3:22 pm

Re: pot purri of path issues

Postby Russ4262 » Sat Jul 06, 2019 3:29 am

chrisb wrote:
Thu Jul 04, 2019 7:27 pm
Russ4262 wrote:
Thu Jul 04, 2019 4:11 pm
Starting with no existing feature transformations, do the following.
  1. Select the feature(s) you wish to use as the base feature(s) for your `MulitTransformation Feature`. Example: this might be a padded sketch, or a pocketed sketch.
It is not yet quite correct: You cannot start with more than one feature selected, and selecting more than one is a mess:
To add another feature you have to
- click the "Add feature" button in the transform tool
- switch to the tree view
- make the feature you want to add visible. Note: this will hide the previously visible feature
- Click on anything in 3D view.

Add this information to the PartDesign_MultiTransform wiki.

Posts: 21338
Joined: Tue Mar 17, 2015 9:14 am

Re: pot purri of path issues

Postby chrisb » Sat Jul 06, 2019 6:36 am

Thanks for adding it; with all the splitting hassle I forgot to ask if you would do it.

You dropped the easy way for starting such feature, it was present in your post above:
- "Select a feature in the tree and initiate the MultiTransform tool"
" ... " points 1 & 2.