Japanease Translation

Discussions about the wiki documentation of FreeCAD and its translation.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
masazz
Posts: 12
Joined: Fri Sep 28, 2012 9:58 am

Re: Japanease Translation

Post by masazz »

Dear wiki administrator

I would like to translate the english manual page into japanese
with some friends in Japan.

So could you give the edit permission of wiki to users as listed below?

htsubota
masazz

Thanks in advance,
Masashi
User avatar
yorik
Founder
Posts: 13640
Joined: Tue Feb 17, 2009 9:16 pm
Location: Brussels
Contact:

Re: Japanease Translation

Post by yorik »

Hi
Okay, you guys have edit rights now.
Someone has already started working on a japanese translation in the past ( http://sourceforge.net/apps/mediawiki/f ... elp_Toc/jp ) but that's quite some time ago, you might need to review that, probably much of the english content has changed since then, and you might need to do some update... But at least all the templates are created already. Thanks for the help anyway, have fun, and if you have any doubts, just post here!
masazz
Posts: 12
Joined: Fri Sep 28, 2012 9:58 am

Re: Japanease Translation

Post by masazz »

Hi Yorik

Thanks a lot for giving us edit right and many advices for the translation.

In addition to translating english contents into japanese , we are going to review past japanese translation pages.

All the best,
Masashi
pperisin
Posts: 695
Joined: Wed Oct 20, 2010 12:29 pm

Re: Japanease Translation

Post by pperisin »

In case you are interested, you can also translate FreeCAD itself on japanese - it is currently 55% done:

http://crowdin.net/project/freecad

Regards,
Petar
masazz
Posts: 12
Joined: Fri Sep 28, 2012 9:58 am

Re: Japanease Translation

Post by masazz »

Hi!

@ Yorik
Fortunately other four people applied for japanese translation.
So could you again give the edit permission of wiki to users as listed below?

hnagano
onshin
t-akiyama
sionoa70

@ Petar
Thank you for the information.
I would like to take care of translating FreeCAD itself on japanese in addition to the wiki translation.

All the best,
Masashi
masazz
Posts: 12
Joined: Fri Sep 28, 2012 9:58 am

Re: Japanease Translation

Post by masazz »

Dear forum administrator,

Although our Japanese translation team are going to translate manual and FreeCAD itself into Japanese,
I think Japanese FreeCAD user will increase rapidly if forum in Japanese exists on this board
because many ordinary Japanese users including me are not good at reading and writing English.

So if creating forum in Japanese is not so tough for you,
could you please take it into consideration for a while?

Thanks in advance,
Masashi
wmayer
Founder
Posts: 20245
Joined: Thu Feb 19, 2009 10:32 am
Contact:

Re: Japanease Translation

Post by wmayer »

Creating a Japanese sub-forum is no problem. Just let us know how you translate "Forum in Japanese" into Japanese.
User avatar
NormandC
Veteran
Posts: 18589
Joined: Sat Feb 06, 2010 9:52 pm
Location: Québec, Canada

Re: Japanease Translation

Post by NormandC »

According to Google Translate it's

日本語フォーラム

But these translating engines are notoriously bad between western languages, I'll bet it's even worse for western <--> eastern translation. :)
masazz
Posts: 12
Joined: Fri Sep 28, 2012 9:58 am

Re: Japanease Translation

Post by masazz »

Hi All!

@ wmayer

Thank you so much for cooperation!

"Forum in Japanese" would be "日本語フォーラム" in Japanese.

@ normandc

Thank you for googling!
Google translation is bingo for this ;)

Masashi
wmayer
Founder
Posts: 20245
Joined: Thu Feb 19, 2009 10:32 am
Contact:

Re: Japanease Translation

Post by wmayer »

Here we go: viewforum.php?f=16
Post Reply