MACRO:Work Feature 2014_12
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
-
- Posts: 181
- Joined: Tue Oct 21, 2014 9:47 am
- Location: Pau (France)
Re: MACRO:Work Feature 2014_12
Sgrogan,
yes i noticed that and i have the same behavior.
neverteless the functions of Curves and Surfaces tabs seems to works proprely!!?
I am looking to fix it.
thank you for your help.
i will keep you inform
Rentlau_64
yes i noticed that and i have the same behavior.
neverteless the functions of Curves and Surfaces tabs seems to works proprely!!?
I am looking to fix it.
thank you for your help.
i will keep you inform
Rentlau_64
Re: MACRO:Work Feature 2014_12
Works Fine for me also!
Thanks a lot again for this macro! Since I use it it has become mandatory for all my projects!
Thanks a lot again for this macro! Since I use it it has become mandatory for all my projects!
-
- Posts: 181
- Joined: Tue Oct 21, 2014 9:47 am
- Location: Pau (France)
Re: MACRO:Work Feature 2014_12
Hello,
I corrected the bug concerning the 'progressBar'. and committed.
not yet the close button behavior.
Have fun
Rentlau_64
I corrected the bug concerning the 'progressBar'. and committed.
not yet the close button behavior.
Have fun
Rentlau_64
Re: MACRO:Work Feature 2014_12
Hi @ Rentlau_64rentlau_64 wrote: Have fun
Rentlau_64
Great tools!
it would be possible to add a translation on axis?
I mean in Modif. Rotate it is possible to select an axis to use as reference for rotation and there is a slider to set the angle...
It would be nice if it would be possible to have the same also in Translate ... Adding to Start, End tab an Axis tab to set translation on axis and a slider to do the translation...
That would be useful when having to move on its axis a part that is not oriented to any main axis...
thx
Maurice
-
- Posts: 181
- Joined: Tue Oct 21, 2014 9:47 am
- Location: Pau (France)
Re: MACRO:Work Feature 2014_12
Maurice,
thank you, I am please that the macro helps you.
I will look for the axis translation,
long time i didn't touch this part of the code but 'apriori" seems not difficult to add.
Let see if I get some time to do it this week end, but quite sure next week.
Will keep you inform.
Rentlau_64
thank you, I am please that the macro helps you.
I will look for the axis translation,
long time i didn't touch this part of the code but 'apriori" seems not difficult to add.
Let see if I get some time to do it this week end, but quite sure next week.
Will keep you inform.
Rentlau_64
-
- Posts: 181
- Joined: Tue Oct 21, 2014 9:47 am
- Location: Pau (France)
Re: MACRO:Work Feature 2014_12
Hello!
A new release 2017-02-05 is available:
https://github.com/Rentlau/WorkFeature.git
documentation on releases at:
https://github.com/Rentlau/WorkFeature/ ... tation.pdf
some documentation at:
https://github.com/Rentlau/WorkFeature/ ... tation.pdf
Some Tutorials below:
/WorkFeature/Doc/Tutorials/
https://github.com/Rentlau/WorkFeature/ ... egment.mp4
https://github.com/Rentlau/WorkFeature/ ... Points.mp4
https://github.com/Rentlau/WorkFeature/ ... Points.mp4
WF_Tuto_WIRE_2DConvexPolygon.mp4
WF_Tuto_WIRE_CreatePolygon.mp4
WF_Tuto_WIRE_Regression2D.mp4
To see these files you must download the .zip file from github and go into /WorkFeature-master/WorkFeature/Doc/Tutorials/ directory after unzip.
@ easyw-fc
I added a Translation based on selection of a Axis/segment.
Hope it will help you?
Have fun.
Rentlau_64
A new release 2017-02-05 is available:
https://github.com/Rentlau/WorkFeature.git
documentation on releases at:
https://github.com/Rentlau/WorkFeature/ ... tation.pdf
some documentation at:
https://github.com/Rentlau/WorkFeature/ ... tation.pdf
Some Tutorials below:
/WorkFeature/Doc/Tutorials/
https://github.com/Rentlau/WorkFeature/ ... egment.mp4
https://github.com/Rentlau/WorkFeature/ ... Points.mp4
https://github.com/Rentlau/WorkFeature/ ... Points.mp4
WF_Tuto_WIRE_2DConvexPolygon.mp4
WF_Tuto_WIRE_CreatePolygon.mp4
WF_Tuto_WIRE_Regression2D.mp4
To see these files you must download the .zip file from github and go into /WorkFeature-master/WorkFeature/Doc/Tutorials/ directory after unzip.
@ easyw-fc
I added a Translation based on selection of a Axis/segment.
Hope it will help you?
Have fun.
Rentlau_64
Last edited by rentlau_64 on Thu Feb 09, 2017 6:22 am, edited 2 times in total.
Re: MACRO:Work Feature 2014_12
by mistake I duplicated the post
Maurice
Maurice
Last edited by easyw-fc on Mon Feb 06, 2017 1:32 pm, edited 3 times in total.
Re: MACRO:Work Feature 2014_12
Hi @rentlau_64rentlau_64 wrote:Hello!
A new release 2017-02-05 is available:
https://github.com/Rentlau/WorkFeature.git
@ easyw-fc
I added a Translation based on selection of a Axis/segment.
Hope it will help you?
Have fun.
Rentlau_64
I downloaded the latest WF macro and I placed it on my macro folder...
I can launch it, but if I try to apply a Translation or a Rotation to a Part I get errors...
Here a log:
Tested with FC 0.16 and FC 01.7 both 64bLog: Loading GUI of Part module... done
Log: Init: Showing main window
Log: Main window restored
Log: Show main window
Log: Toolbars restored
Log: 3Dconnexion device not attached.
Log: Init: Entering event loop
Log: Init: Processing command line files
Msg: Loaded from common database : 22 curves !Msg:
Msg: Loaded from common database : 19 curves !Msg:
Msg: Combo View<PySide.QtGui.QDockWidget object at 0x0000026D921FE908>Msg:
Msg: Combo View<PySide.QtGui.QDockWidget object at 0x0000026D921FE908>
Msg: WorkFeatures<PySide.QtGui.QDockWidget object at 0x0000026D91B8CA88>Msg:
Msg: WorkFeatures<PySide.QtGui.QDockWidget object at 0x0000026D91B8CA88>
Msg: Tabified done !Msg:
Msg: Tabified done !
Err: Unhandled unknown exception caught in GUIApplication::notify.
Log: The event type 2 was sent to QPushButton
Object tree:
QPushButton (ObjRot_button_select) is child of
QFrame (frame_11) is child of
QWidget (rotate_tab_2) is child of
QStackedWidget (qt_tabwidget_stackedwidget) is child of
QTabWidget (tabWidget_9) is child of
QWidget (Modif_Tab_2) is child of
QStackedWidget (qt_tabwidget_stackedwidget) is child of
QTabWidget (tabWidget_7) is child of
QWidget (scrollAreaWidgetContents) is child of
QWidget (qt_scrollarea_viewport) is child of
QScrollArea (scrollArea) is child of
QWidget (Form) is child of
QWidget is child of
QDockWidget (WorkFeatures) is child of
Gui::MainWindowErr: Unhandled unknown exception caught in GUIApplication::notify.
more test:
if I launch the macro using "start_WF.FCMacro"
I get this error:
EDITTraceback (most recent call last):
File "C:\Cad\Progetti_K\3D-FreeCad-tools\WorkFeature\WF_ObjRot_2015.py", line 362, in initialize
func.print_msg("initialize !")
File "C:\Cad\Progetti_K\3D-FreeCad-tools\WorkFeature\WF_2015.py", line 209, in print_msg
print message
AttributeError: 'list' object has no attribute 'write'
I found:
I had to comment all the occurrence of
Code: Select all
print message
now it works fine
Thx
Maurice
-
- Posts: 181
- Joined: Tue Oct 21, 2014 9:47 am
- Location: Pau (France)
Re: MACRO:Work Feature 2014_12
Maurice,
Thank for the info. unfortunately never see this kind of error.
Seems to be relative to a "list" to print!?
Could you describe me the suite of actions you realized to get this error in order to me to reproduce and fix it. (better if you give me a FreeCAD file also)
Merci
Rentlau_64
PS: I use:
OS: Ubuntu 15.04
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6692 (Git)
Build type: None
Branch: master
Hash: 87293fac9bb85c5f5e0ebf563374e27d565116ae
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
Thank for the info. unfortunately never see this kind of error.
Seems to be relative to a "list" to print!?
Could you describe me the suite of actions you realized to get this error in order to me to reproduce and fix it. (better if you give me a FreeCAD file also)
Merci
Rentlau_64
PS: I use:
OS: Ubuntu 15.04
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6692 (Git)
Build type: None
Branch: master
Hash: 87293fac9bb85c5f5e0ebf563374e27d565116ae
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
Re: MACRO:Work Feature 2014_12
EDITrentlau_64 wrote:Maurice,
Thank for the info. unfortunately never see this kind of error.
Seems to be relative to a "list" to print!?
Could you describe me the suite of actions you realized to get this error in order to me to reproduce and fix it. (better if you give me a FreeCAD file also)
Merci
Rentlau_64
any "print" occurrence will trig the error, not only "print message" I've found
It should be enough to enable python redirect to report view to trig the error