Automatic Light Gauge Steel Frame Creator macro

A forum dedicated to the Arch module development
User avatar
bitacovir
Posts: 238
Joined: Sat Apr 19, 2014 6:23 am
Contact:

Re: Automatic Light Gauge Steel Frame Creator macro

Postby bitacovir » Tue Jan 23, 2018 12:35 am

hhassey wrote:
Mon Jan 22, 2018 6:50 pm

Seismic Country.... Actually for seismic we need to incorporate diagonals, but, who in his right mind tries to use light gauge as a shear wall?
that does not make a lot of sense to me, but putting those diagonals by hand is very easy right now!
Oh, sure you can use it in a seismic country if you make the right structural design.
Here you are with a Chilean brand of this technology that it is very popular. The name is METALCOM
http://www.cintac.cl/perfiles-metalcon/
phpBB [video]
::bitacovir::
===================================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)

My Blog
Mini Airflow Tunnel Project
User avatar
bernd
Posts: 5720
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: Automatic Light Gauge Steel Frame Creator macro

Postby bernd » Tue Jan 23, 2018 4:23 am

:shock: These little screws in the diagonals should resist the whole structure in an chilenian earthquake :shock: :o
User avatar
bitacovir
Posts: 238
Joined: Sat Apr 19, 2014 6:23 am
Contact:

Re: Automatic Light Gauge Steel Frame Creator macro

Postby bitacovir » Tue Jan 23, 2018 3:15 pm

bernd wrote:
Tue Jan 23, 2018 4:23 am
:shock: These little screws in the diagonals should resist the whole structure in an chilenian earthquake :shock: :o
Jejeje. It's totally tested technology. 8-) https://earthquaketrack.com/p/chile/recent 8-)
The video explains that you can omit these diagonals if you cover the structure with something like plywood panels.
Also, the video shows a structure for seismic conditions. It considers three studs at the edge/corner and beams at the top of each wall.
::bitacovir::
===================================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)

My Blog
Mini Airflow Tunnel Project
User avatar
bernd
Posts: 5720
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: Automatic Light Gauge Steel Frame Creator macro

Postby bernd » Tue Jan 23, 2018 8:23 pm

this stuff weight is really low which means low earthquake forcrs too.
User avatar
hhassey
Posts: 92
Joined: Thu Jun 04, 2015 8:01 pm
Location: Ensenada, Mexico

Re: Automatic Light Gauge Steel Frame Creator macro

Postby hhassey » Sun Jan 28, 2018 9:35 pm

bernd wrote:
Tue Jan 23, 2018 8:23 pm
this stuff weight is really low which means low earthquake forcrs too.
Well... for the dead weight yes, for live loads, nop, and those are big... remember we design always for a combination of Dead Weight + Live Loads + Accidental Loads (i.e. earthquake)
User avatar
Kunda1
Posts: 2412
Joined: Thu Jan 05, 2017 9:03 pm

Re: Automatic Light Gauge Steel Frame Creator macro

Postby Kunda1 » Mon Jun 04, 2018 8:26 pm

hhassey wrote:ping
@hhassey any new developments ?
Want to contribute back to FC? Checkout:
#lowhangingfruit | Use the Source, Luke. | How to Help FreeCAD | How to report FC bugs and features
User avatar
hhassey
Posts: 92
Joined: Thu Jun 04, 2015 8:01 pm
Location: Ensenada, Mexico

Re: Automatic Light Gauge Steel Frame Creator macro

Postby hhassey » Tue Jun 12, 2018 10:33 pm

Kunda1 wrote:
Mon Jun 04, 2018 8:26 pm
hhassey wrote:ping
@hhassey any new developments ?
Not really, in my To do list was to automate the corners, inside and outside, shouldn't be that difficult, but since I have not seen a lot of interest, I have been doing other stuff...
User avatar
bitacovir
Posts: 238
Joined: Sat Apr 19, 2014 6:23 am
Contact:

Re: Automatic Light Gauge Steel Frame Creator macro

Postby bitacovir » Wed Jun 13, 2018 4:41 am

hhassey wrote:
Tue Jun 12, 2018 10:33 pm
Kunda1 wrote:
Mon Jun 04, 2018 8:26 pm
hhassey wrote:ping
@hhassey any new developments ?
Not really, in my To do list was to automate the corners, inside and outside, shouldn't be that difficult, but since I have not seen a lot of interest, I have been doing other stuff...
what a pity... I liked your work.
::bitacovir::
===================================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)

My Blog
Mini Airflow Tunnel Project