Arch Objects can attach to a Window Object now.
Update at Github - https://github.com/paullee0/FreeCAD_SketchArch ...
Hope it helps
SketchArch Addon [Comments Request /PR] - Intuitive Automatic Windows/Doors + Equipment Placement
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: SketchArch Addon [Comments Request /PR] - Intuitive Automatic Windows/Doors + Equipment Placement
Motivated by this model intend to place a Window at MidPoint of a Wall, add feature to 'snap' Window parametrically and intuitively.
Re: SketchArch Addon [Comments Request /PR] - Intuitive Automatic Windows/Doors + Equipment Placement
Update at Github - https://github.com/paullee0/FreeCAD_SketchArch
Added Attribute -
(Master Sketch Subelement) Snap Preset : Allow users to snap to a Wall Axis e.g. at -
(Master Sketch Subelement) Snap Custom : Allow users to snap to any value e.g. in fraction in formula 2/9 etc.
Added Attribute -
(Master Sketch Subelement) Snap Preset : Allow users to snap to a Wall Axis e.g. at -
- MidPoint
- 1/4 (of WallLength from StartPoint)
- 1/3
- 2/3
- 3/4
- AxisStart
- AxisEnd
- Custom Value
(Master Sketch Subelement) Snap Custom : Allow users to snap to any value e.g. in fraction in formula 2/9 etc.
Re: SketchArch Addon [Comments Request /PR] - Intuitive Automatic Windows/Doors + Equipment Placement
balrobs wrote: ↑Wed Jan 13, 2021 3:27 pmAdded to Github issue queue: https://github.com/paullee0/FreeCAD_SketchArch/issues/5paullee wrote: ↑Thu Jan 07, 2021 5:39 pmAlso adding this to Guihub as another Issue ?balrobs wrote: ↑Sun Jan 03, 2021 12:05 pm How about not only being able to enter the Offset Distance on the Master Sketch (like in the first wall of image below) but also on wall faces.
When I position a Window/Door (or a Furniture) most of the time I would like to fix it in relation to a wall edge. So maybe a possible way to achieve this could be to proper rename the "Master Sketch Subelement Offset" parameter and to interpret it as Offset Distance along the Right-Wall-Face when "Attachment Aligment" = EdgeGroupWidthRight (second wall image below) or as Offset distance along the Left-Wall-Face when "Attachment Aligment" = EdgeGroupWidthLeft (third wall image below).
Thanks.
Update on GitHub -
"I have another look at this issue, and realise it was in fact implemented.
The Arch Equipment, Windows etc. can attach to the (inner/outer) wall face, not only the 'Axis' of the Wall (the Edges in the ArchSketch).
User can select 'Wall Left' or 'Wall Right' in the Offset Alignment as desired.
Please see if this issue should be closed ?
Thanks "
https://forum.freecadweb.org/viewtopic. ... 00#p467577
Video on 16.1.2021