Arch adding 2 walls: results in incorrect shape

A forum dedicated to the Draft, Arch and BIM workbenches development.
Posts: 76
Joined: Fri Jan 15, 2016 7:08 pm
Location: Vendée - France

Arch adding 2 walls: results in incorrect shape

Postby JLB85FR » Fri Mar 25, 2016 1:01 pm

Adding 2 walls with the '+' button in Arch, results in an incorrect shape displayed (one of the walls in made of an extrusion with a Bezier curve). if selecting the 'cut', the 2 shapes (result and cut) do not correspond (see pictures below)

The actions to perform are:
- select Arch workbench
- select 'cut_porche_est'
- select+ctrl 'wall001_house'
- Add (+)

it's similar if adding 'cut_wall_arche_nord' to wall001_house

and 2 other questions:
- why do the 'cut_porche_est' and 'cut_wall_arche_nord) colors stay gray, while the color property of the shapes is yellow (255,255,127) ?
- I cannot add the 2 cuts (cut_wall_arche_nord + cut_porche_est), '+' button has no effect, is this normal ?

OS: Windows XP
Word size of OS: 32-bit
Word size of FreeCAD: 32-bit
Version: 0.16.6651 (Git)
Build type: Release
Branch: master
Hash: a69ee20f0c2acf146c935633ff43f933a8b14316
Python version: 2.7.8
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
house add bezier.FCStd
(625.2 KiB) Downloaded 46 times
cut with bezier curve 2.PNG
cut with bezier curve 2.PNG (4.05 KiB) Viewed 732 times
cut with bezier curve.PNG
cut with bezier curve.PNG (4.17 KiB) Viewed 732 times