Shape2DView does not show a sweep shape section

A forum dedicated to the Arch module development
User avatar
bitacovir
Posts: 313
Joined: Sat Apr 19, 2014 6:23 am
Contact:

Shape2DView does not show a sweep shape section

Postby bitacovir » Sat Apr 21, 2018 12:34 pm

I created a sweep shape of a duct, but when I made a Arch Section and a Shape2DView to project the section, there is no projection.
Is shape2DView supporting sweep shapes?

OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.13515 (Git)
Build type: Release
Branch: releases/FreeCAD-0-17
Hash: e17b340949b75a226cc7d89989b0aa238ccfc75f
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: English/Australia (en_AU)
::bitacovir::
===================================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)

My Blog
Mini Airflow Tunnel Project
User avatar
yorik
Site Admin
Posts: 9917
Joined: Tue Feb 17, 2009 9:16 pm
Location: São Paulo, Brazil
Contact:

Re: Shape2DView does not show a sweep shape section

Postby yorik » Mon Apr 23, 2018 4:07 pm

normally yes.. care to share your file?
User avatar
bitacovir
Posts: 313
Joined: Sat Apr 19, 2014 6:23 am
Contact:

Re: Shape2DView does not show a sweep shape section

Postby bitacovir » Mon Apr 23, 2018 5:56 pm

yorik wrote:
Mon Apr 23, 2018 4:07 pm
normally yes.. care to share your file?
Sure. here you are...
Thanks
fundation_sweep.FCStd
(11.37 KiB) Downloaded 10 times
OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.13515 (Git)
Build type: Release
Branch: releases/FreeCAD-0-17
Hash: e17b340949b75a226cc7d89989b0aa238ccfc75f
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: English/Australia (en_AU)
::bitacovir::
===================================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)

My Blog
Mini Airflow Tunnel Project
jaisejames
Posts: 209
Joined: Sat Sep 24, 2016 6:51 am

Re: Shape2DView does not show a sweep shape section

Postby jaisejames » Tue Apr 24, 2018 4:59 am

Please set either solid to true in sweep in Data tab or Only solids to false in Section Data Tab to get shape2d view.
User avatar
bitacovir
Posts: 313
Joined: Sat Apr 19, 2014 6:23 am
Contact:

Re: Shape2DView does not show a sweep shape section

Postby bitacovir » Tue Apr 24, 2018 4:37 pm

jaisejames wrote:
Tue Apr 24, 2018 4:59 am
Please set either solid to true in sweep in Data tab or Only solids to false in Section Data Tab to get shape2d view.
It works! Thank you.
::bitacovir::
===================================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)

My Blog
Mini Airflow Tunnel Project