[done] Open source tiny house as a community project?

A forum dedicated to the Draft, Arch and BIM workbenches development.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

[done] Open source tiny house as a community project?

Post by thomas-neemann »

are there people here who would like to work on an open sorce tiny house project? it is to be built in series. it should weigh over 3.5 tons and be pulled by a tractor.
the basis should be something like this:

Bildschirmfoto_2021-08-17_17-35-10.png
Bildschirmfoto_2021-08-17_17-35-10.png (218.22 KiB) Viewed 6108 times

Bildschirmfoto_2021-08-17_17-39-17.png
Bildschirmfoto_2021-08-17_17-39-17.png (291.39 KiB) Viewed 6108 times



the design should look something like this

Bildschirmfoto_2021-08-17_17-53-25.png
Bildschirmfoto_2021-08-17_17-53-25.png (341.98 KiB) Viewed 6108 times
Bildschirmfoto_2021-08-17_17-55-08.png
Bildschirmfoto_2021-08-17_17-55-08.png (118.86 KiB) Viewed 6108 times

Greetings Thomas
Last edited by thomas-neemann on Tue Jan 25, 2022 8:37 am, edited 1 time in total.
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
gbroques
Posts: 167
Joined: Thu Jan 23, 2020 3:28 am
Location: St. Louis, Missouri

Re: Open source tiny house as a community project?

Post by gbroques »

thomas-neemann wrote: Tue Aug 17, 2021 4:08 pm are there people here who would like to work on an open sorce tiny house project?
Hi Thomas,

I unfortunately don't have time to work on this project currently as I'm already preoccupied with another project (one dealing with renewable wind energy).

I just wanted to say that I think it's a great idea, and would love to see a community open-source tiny house project in FreeCAD.

At some point in my life, at a later stage, I will likely do something similar myself.
paullee
Veteran
Posts: 5097
Joined: Wed May 04, 2016 3:58 pm

Re: Open source tiny house as a community project?

Post by paullee »

Open Source House with Open Source CAD? again ?

Sound intesting. Can contribute as limited time allows. :)

Any layout plan ?
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Open source tiny house as a community project?

Post by thomas-neemann »

paullee wrote: Tue Aug 17, 2021 9:32 pm ...Any layout plan ?
That is still open, or could also be left open so that every customer can get their own individual floor plan.

The idea is to have a door in the middle at the side and in the middle at the back to combine 2 buildings if necessary.


1.png
1.png (11.38 KiB) Viewed 5991 times


2.png
2.png (9.13 KiB) Viewed 5991 times

there is also e.g. an experience report from a yutuber who would move his bedroom downstairs at the next house because it is cooler there in summer.



trailer download https://grabcad.com/library/low-loader-trailer
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Open source tiny house as a community project?

Post by thomas-neemann »

here is an idea to improve the standing height on the upper floor with a telescopic roof. during the journey it is retracted 4 meters in total.


1.jpg
1.jpg (13.54 KiB) Viewed 5965 times

2.jpg
2.jpg (13.19 KiB) Viewed 5965 times

edit

the shower with the siphon is difficult because of the height. Here is a suggestion for a suitable installation position





1.png
1.png (43.31 KiB) Viewed 5937 times
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Open source tiny house as a community project?

Post by thomas-neemann »

here is a visualization of the telescope roof


https://www.youtube.com/watch?v=DS_w2MRqJ0M

1.png
1.png (69.78 KiB) Viewed 5925 times
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Open source tiny house as a community project?

Post by thomas-neemann »

here is a convenient technical solution for the telescopic roof.


linearmotor1000mm.png
linearmotor1000mm.png (99.09 KiB) Viewed 5847 times
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Open source tiny house as a community project?

Post by thomas-neemann »

i start with the roof construction and would want to use cross-sections from comparable constructions without a static calculation.

z.b.
kantholz.png
kantholz.png (83.5 KiB) Viewed 5818 times


comparison:


Bildschirmfoto_2021-08-19_11-04-19.png
Bildschirmfoto_2021-08-19_11-04-19.png (12.14 KiB) Viewed 5818 times






and

rechteckrohr.png
rechteckrohr.png (43.16 KiB) Viewed 5818 times


comparison:


metallprofil.png
metallprofil.png (25.99 KiB) Viewed 5818 times


if there are better suggestions, now is the time. later changes are usually very time-consuming


Greetings Thomas
Last edited by thomas-neemann on Thu Aug 19, 2021 12:10 pm, edited 1 time in total.
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
chrisb
Veteran
Posts: 53919
Joined: Tue Mar 17, 2015 9:14 am

Re: Open source tiny house as a community project?

Post by chrisb »

As this post is in the English - or better: international - part of the forum, please keep the conversation in English. And images showing text preferably too.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Open source tiny house as a community project?

Post by thomas-neemann »

chrisb wrote: Thu Aug 19, 2021 12:10 pm As this post is in the English - or better: international - part of the forum, please keep the conversation in English. And images showing text preferably too.
had just noticed and changed it myself
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
Post Reply