Re: V0.18, A2+WB, PathWB, FastenerWB. KiKAD Step Up WB, Modular housing for CNC router elektronic

Show off your FreeCAD projects here!
User avatar
roerich_64
Posts: 296
Joined: Thu May 21, 2015 7:00 pm

Re: V0.18, A2+WB, PathWB, FastenerWB. KiKAD Step Up WB, Modular housing for CNC router elektronic

Postby roerich_64 » Sat Jan 12, 2019 4:53 pm

Hi,

a housing for the elektronik of my CNC-Router:
P1120837.JPG
P1120837.JPG (986.31 KiB) Viewed 893 times
Airfilters in the front:
P1120828.JPG
P1120828.JPG (969.24 KiB) Viewed 893 times
Fan's and their guards:
P1120829.JPG
P1120829.JPG (970.16 KiB) Viewed 893 times
Modular and easy mounting of the electronics:
P1120822.JPG
P1120822.JPG (950.41 KiB) Viewed 893 times
The plates on the back are plugged in and can easily be exchanged for changes ...
P1120831.JPG
P1120831.JPG (864.14 KiB) Viewed 893 times
to be continued ( Limit 5 pictures )
Last edited by roerich_64 on Sat Jan 19, 2019 10:04 am, edited 1 time in total.
User avatar
roerich_64
Posts: 296
Joined: Thu May 21, 2015 7:00 pm

Re: V0.18, A2+WB, PathWB, FastenerWB. Modular housing for CNC router elektronic

Postby roerich_64 » Sat Jan 12, 2019 5:03 pm

Now in FreeCAD:
Controller_II.jpeg
Controller_II.jpeg (63.83 KiB) Viewed 887 times
Controller_III.jpeg
Controller_III.jpeg (87.23 KiB) Viewed 887 times
Regards
Walter
freecad-heini-1
Posts: 4970
Joined: Tue Jan 07, 2014 11:10 am
Contact:

Re: V0.18, A2+WB, PathWB, FastenerWB. Modular housing for CNC router elektronic

Postby freecad-heini-1 » Sat Jan 12, 2019 6:25 pm

roerich_64 wrote:
Sat Jan 12, 2019 5:03 pm
Now in FreeCAD:
Controller_II.jpeg
Controller_III.jpeg

Regards
Walter
Hi Walter,
thank you very much for your ongoing great job with Freecad and handcraftet cnc project.
Best regards
Wilfried
User avatar
roerich_64
Posts: 296
Joined: Thu May 21, 2015 7:00 pm

Re: V0.18, A2+WB, PathWB, FastenerWB. Modular housing for CNC router elektronic

Postby roerich_64 » Sun Jan 13, 2019 9:54 am

Hello Wilfried,

Thank you! :)

FreeCAD V0.18, A2+, Fastener and the Path workbenches are to me as a swiss pocket knife :)
Also in combination with KiCAD :)

Since ~1990 i searched to such wonderful tools to create my ideas!

I have to bow low to the programmers of FreeCAD and KiCAD!!!

Thank you whery much to all!

Regards
Walter
User avatar
roerich_64
Posts: 296
Joined: Thu May 21, 2015 7:00 pm

Re: V0.18, A2+WB, PathWB, FastenerWB. Modular housing for CNC router elektronic

Postby roerich_64 » Tue Jan 15, 2019 9:01 pm

a little homage to the programmers of A2+WB:
Controller_V.jpeg
Controller_V.jpeg (319.77 KiB) Viewed 436 times
Handle all the parts is very easy with A2+.
I hope all the people who see this Picture can guess how complex this draft at this moment is...

Let me show you the spreadsheet:
Controller_VI.jpg
Controller_VI.jpg (332.22 KiB) Viewed 436 times
Walter
User avatar
Kunda1
Posts: 3543
Joined: Thu Jan 05, 2017 9:03 pm

Re: V0.18, A2+WB, PathWB, FastenerWB. Modular housing for CNC router elektronic

Postby Kunda1 » Wed Jan 16, 2019 1:16 am

Awesome! What version of A2plus are you using ?
Want to contribute back to FC? Checkout:
#lowhangingfruit | Use the Source, Luke. | How to Help FreeCAD | How to report FC bugs and features
User avatar
roerich_64
Posts: 296
Joined: Thu May 21, 2015 7:00 pm

Re: V0.18, A2+WB, PathWB, FastenerWB. Modular housing for CNC router elektronic

Postby roerich_64 » Wed Jan 16, 2019 7:06 am

Thank you :)

It is the newest, 0.2.6 i think...
Where can i found the version number of A2+
herbk
Posts: 1136
Joined: Mon Nov 03, 2014 3:45 pm
Location: Windsbach, Bavarya (Germany)

Re: V0.18, A2+WB, PathWB, FastenerWB. Modular housing for CNC router elektronic

Postby herbk » Wed Jan 16, 2019 8:48 am

roerich_64 wrote:
Wed Jan 16, 2019 7:06 am
Thank you :)

It is the newest, 0.2.6 i think...
Where can i found the version number of A2+
If A2+ is newer then 2.4, the version nr is a extension of the WB name. You can see it at the WB selection menue.

But i suggest it's not all made with the last version, - or you are very quick... ;) :lol:
Gruß Herbert
User avatar
roerich_64
Posts: 296
Joined: Thu May 21, 2015 7:00 pm

Re: V0.18, A2+WB, PathWB, FastenerWB. Modular housing for CNC router elektronic

Postby roerich_64 » Wed Jan 16, 2019 9:44 am

After a restart of FreeCAD i found it :)
Thanks to Herbert!

The Version is 0.2.5 of yesterday evening with the new transparent-Macro ;)
User avatar
roerich_64
Posts: 296
Joined: Thu May 21, 2015 7:00 pm

Re: V0.18, A2+WB, PathWB, FastenerWB. KiKAD Step Up WB, Modular housing for CNC router elektronic

Postby roerich_64 » Sat Jan 19, 2019 10:03 am

Hi,
here a first look to the elektronik parts:
Elektronik_I.jpg
Elektronik_I.jpg (473.16 KiB) Viewed 92 times
The KiCAD StepUp WB helps me great to design the MEGA and the shield! :)

Now i have a new idea for the design of the backside wall ;)

BR
Walter