SlopedPlanesMacro

[Kunda1]

good morning

You've been busy! Nice!

[microelly2]

Thanks, so a new step of reconstructive modeling can start

bp_657.png (1015.57 KiB) Viewed 2468 times

my intension was to get the basic geometry from such pictures. Lets see how we can combine edge detection with your parametric models.

[Kunda1]

[damian]

the basic geometry from such pictures

Well. I'm looking the two images posted for you in this forum. Three things:
1º) to migrate from extruding to sweep. Sometimes the slope change in a face. More parameters (a lot of mathematical parameters)
2º) the ability to combine several roofs in one. For instance for dormers or turrets.
3º) to work with open wires or a simple line. Sunshade.
All tasks are for the beta version

Lets see how

making a little base date with the more usual roof configuration. Later the idea will come back naturally ...

[regis]

1º) to migrate from extruding to sweep. Sometimes the slope change in a face. More parameters (a lot of mathematical parameters)
2º) the ability to combine several roofs in one. For instance for dormers or turrets.
3º) to work with open wires or a simple line. Sunshade.

Amazing, I like the way things are moving here.

[damian]

Hi everyone:
I'm a little bit delayed. Why?

The alignment prevents the movement of the planes in its front and laterals, but not to its rear.

But this not completely certain for the front. A plane in a front of an alignment could rebase it by its top. This happens with two or more alignments in a 'rear2rear' situation. The selected planes in the next two figures are examples of this.

rear2rear.png (38.35 KiB) Viewed 2201 times

I've spent the last week solving this unexpected. Complex to find, easy to solve.
Now, I need the same behavior with exterior-interior wires. I know the solution ...
The experience says me that later of a conceptual change, like this, I need a month to torque all bolts again ...
February could be a realistic date, coincident with the release of V.18.
See you soon.

[microelly2]

There are some LOD2 test data available for Bavaria
https://www.ldbv.bayern.de/file/pdf/672 ... n_LoD2.pdf

[damian]

thank you

[damian]

Hello World!
There is an alpha version available at https://github.com/caceres/SlopedPlanesMacro/tree/alpha
At this stage, the macro is incomplete and buggy. Everything could go worse.
In the next weeks and months, I'll publish the instructions.
Thank you

[Kunda1]

Nice!