SlopedPlanesMacro

Show off your FreeCAD projects here!
damian
Posts: 583
Joined: Sun May 31, 2015 6:16 pm

Re: SlopedPlanesMacro

Postby damian » Mon Nov 13, 2017 10:03 pm

microelly2 wrote:
Mon Nov 13, 2017 7:12 pm
for geodata LOD roof design
The total multi function is not possible.
The tool was built with skills suitable for Part design, but it lacks functionality own of one roof tool.
Good night
damian
Posts: 583
Joined: Sun May 31, 2015 6:16 pm

Re: SlopedPlanesMacro

Postby damian » Mon Nov 13, 2017 10:17 pm

Oops! Now it's working. Obviously, there are slack bolts. We are in heavy development.
I continue ...
damian
Posts: 583
Joined: Sun May 31, 2015 6:16 pm

Re: SlopedPlanesMacro

Postby damian » Mon Nov 13, 2017 10:23 pm

Another kind of movement restriction ('dam') is the alignments.
instance_SEVEN.png
instance_SEVEN.png (34.59 KiB) Viewed 1479 times
An alignment is two or more edges producing a unique face.
The alignment prevents the movement of the planes in its front and laterals, but not to its rear.
User avatar
regis
Posts: 714
Joined: Sun Jul 12, 2015 8:17 am
Contact:

Re: SlopedPlanesMacro

Postby regis » Tue Nov 14, 2017 2:59 am

damian wrote:
Mon Nov 13, 2017 5:45 pm
A figure could have several wires and faces. The limit is the FaceMaker.
instance_TWO.png
no freaking way, too sick. finally a better roof tool.
User avatar
bernd
Posts: 9823
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: SlopedPlanesMacro

Postby bernd » Tue Nov 14, 2017 5:57 am

Do you have a place where you share your macro?
damian
Posts: 583
Joined: Sun May 31, 2015 6:16 pm

Re: SlopedPlanesMacro

Postby damian » Tue Nov 14, 2017 8:32 am

regis wrote:
Tue Nov 14, 2017 2:59 am
finally
Thank @regis
bernd wrote:
Tue Nov 14, 2017 5:57 am
share
Yes, of course. In my Github count
https://github.com/caceres/SlopedPlanesMacro
Only for testing!!!. Recently I've made serious changes and I can see several functions break
I hope to announce the Alfa version to the end of the year
User avatar
regis
Posts: 714
Joined: Sun Jul 12, 2015 8:17 am
Contact:

Re: SlopedPlanesMacro

Postby regis » Tue Nov 14, 2017 2:02 pm

damian wrote:
Tue Nov 14, 2017 8:32 am
regis wrote:
Tue Nov 14, 2017 2:59 am
finally
Thank @regis
bernd wrote:
Tue Nov 14, 2017 5:57 am
share
Yes, of course. In my Github count
https://github.com/caceres/SlopedPlanesMacro
Only for testing!!!. Recently I've made serious changes and I can see several functions break
I hope to announce the Alfa version to the end of the year
we are looking forward. This has been much awaited.
damian
Posts: 583
Joined: Sun May 31, 2015 6:16 pm

Re: SlopedPlanesMacro

Postby damian » Tue Nov 14, 2017 5:18 pm

The alignments could be between interior and exterior wires
instance_EIGHT.png
instance_EIGHT.png (40.74 KiB) Viewed 1394 times
damian
Posts: 583
Joined: Sun May 31, 2015 6:16 pm

Re: SlopedPlanesMacro

Postby damian » Tue Nov 14, 2017 6:29 pm

Beginning from a simple alignment it can be divided into two different planes that they admit two different angles. It's a false alignment.
Later, if we eliminate the division the false alignment remains.
instance_NINE.png
instance_NINE.png (49.73 KiB) Viewed 1382 times
User avatar
microelly2
Posts: 4690
Joined: Tue Nov 12, 2013 4:06 pm
Contact:

Re: SlopedPlanesMacro

Postby microelly2 » Wed Nov 15, 2017 6:14 pm

Oh
I see it's time to wonder how to get roof data from aerial views as input for these methods.

Image
(image link from https://www.ldbv.bayern.de/produkte/luf ... ilder.html)