nice to see someone finds this useful.Thanks looo for this workbench
Gears in FreeCAD: FC Gear
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Gears in FreeCAD: FC Gear
Re: Gears in FreeCAD: FC Gear
I do not only think that it is nice. I think it is extremely functional. Specially for 3D printing gears. Making gears for "hobby" was out of the reach of FC... until now.
I am planning to print this:
https://forum.freecadweb.org/viewtopic. ... 24#p220282
You might be able to answer this question, if you have time:
https://forum.freecadweb.org/viewtopic. ... 10#p220538
Thanks for this WB!!
Re: Gears in FreeCAD: FC Gear
I am unable to get a herringbone gear like in abdullah's first post. In fact, I can't even get a single helical involute gear. It should be possible according to the FCGear repo's README. How is it supposed to work?
Changing the double_helix parameter from false to true does nothing.
These are all the properties listed.
I've updated FCGear, relaunched FreeCAD and tried FC v0.17.13541 as well as
OS: Ubuntu 18.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.14575 (Git)
Build type: Release
Branch: master
Hash: a624fee2c27bbbb869df6a8ce40438953a282a8c
Python version: 2.7.15rc1
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: French/Canada (fr_CA)
Changing the double_helix parameter from false to true does nothing.
These are all the properties listed.
I've updated FCGear, relaunched FreeCAD and tried FC v0.17.13541 as well as
OS: Ubuntu 18.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.14575 (Git)
Build type: Release
Branch: master
Hash: a624fee2c27bbbb869df6a8ce40438953a282a8c
Python version: 2.7.15rc1
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: French/Canada (fr_CA)
- Attachments
-
- FCGear_Involute_nc1.fcstd
- (30.54 KiB) Downloaded 76 times
Re: Gears in FreeCAD: FC Gear
any error reports? Maybe this is related to the fact that I switched the workbench to new-module-style. Please install the workbench with pip [1]. I am also working on a alternative for the addon-manager [2].
[1] https://github.com/looooo/FCGear#install
[2] https://github.com/looooo/freecad_pipintegration
[1] https://github.com/looooo/FCGear#install
[2] https://github.com/looooo/freecad_pipintegration
-
- Posts: 2
- Joined: Tue Jan 29, 2019 11:26 pm
Re: Gears in FreeCAD: FC Gear
I came to an understanding that i can achieve an upward angle on the (wider) base side of a bevel gear by choosing the edge and working it with the chamfer tool in part design. Maybe somebody can give me a hint how to achieve an adequate angle on the top, giving it the crown like look.
Re: Gears in FreeCAD: FC Gear
Hi dabeyerbua, and welcome! You can create a Sketch on a vertical Plane, then use Part Design WB > Groove:dabeyerbua wrote: ↑Wed Jan 30, 2019 12:21 am how to achieve an adequate angle on the top, giving it the crown like look.
OS: Ubuntu 18.04.1 LTS
Word size of OS: 32-bit
Word size of FreeCAD: 32-bit
Version: 0.18.15611 (Git)
Build type: Release
Branch: master
Hash: 64a94ae0f7c60fc981086fe157150a9c0dca29c6
Python version: 2.7.15rc1
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
-
- Posts: 2
- Joined: Tue Jan 29, 2019 11:26 pm
Re: Gears in FreeCAD: FC Gear
Thank you, bejant, for the reply and the welcome, i will give it a try
- bavariaSHAPE
- Posts: 406
- Joined: Tue Jun 10, 2014 8:31 am
- Contact:
Re: Gears in FreeCAD: FC Gear
Hallo all,
in this clip I have explained the parameters of FC-Gear. Only in German, but the pictures show the results. I hope it helps a little.
Achim
in this clip I have explained the parameters of FC-Gear. Only in German, but the pictures show the results. I hope it helps a little.
Achim
… for a happy FreeCAD-World … JM2C …
Re: Gears in FreeCAD: FC Gear
Well, I had completely forgotten my trouble from last September and this bump made me remember it.
Anyway, the problem was so simple it's quite silly: I hadn't set a beta angle (my old screenshot shows it at zero). Difficult to get a double helix if there is no helix to start with
@ looo thanks for replying anyway.
Anyway, the problem was so simple it's quite silly: I hadn't set a beta angle (my old screenshot shows it at zero). Difficult to get a double helix if there is no helix to start with
@ looo thanks for replying anyway.
Re: Gears in FreeCAD: FC Gear
To explain what I did in my last post:
- In Part Design I clicked the Involute Gear tool, and accepted the defaults.
If you try to Pad the Involute Gear now it, you'll get a message that you need to have a Body first. - Click the Create Body tool to create a Body.
- In the history tree, drag and drop InvoluteGear into Body.
- Now select InvoluteGear in the history tree and Pad it. I just used the default 10 mm.
- Next I clicked the Create Sketch tool (FreeCAD opens the Sketcher WB), chose a vertical plane, and made the Sketch.
- Close Sketcher, and FreeCAD will bring you back to the Part Design WB.
- Select the Sketch, and click the Groove tool.