Lanz Bulldog mini tractor

Show off your FreeCAD projects here!
un1corn
Posts: 122
Joined: Sat Dec 26, 2015 2:06 pm

Lanz Bulldog mini tractor

Postby un1corn » Sun Dec 02, 2018 12:41 pm

Uses flame eater type Stirling engine.
Attachments
Fin 0.JPG
Fin 0.JPG (301.96 KiB) Viewed 2932 times
Fin 1.JPG
Fin 1.JPG (117.48 KiB) Viewed 2932 times
Lanz Engine and Gearbox.JPG
Lanz Engine and Gearbox.JPG (55.42 KiB) Viewed 2932 times
Lanz Rear Axle Assembly.JPG
Lanz Rear Axle Assembly.JPG (62.35 KiB) Viewed 2932 times
chrisb
Posts: 18161
Joined: Tue Mar 17, 2015 9:14 am

Re: Lanz Bulldog mini tractor

Postby chrisb » Sun Dec 02, 2018 2:03 pm

Very impressive, thanks for sharing. Call yourself lucky that these engines had only one cylinder - at most!
un1corn
Posts: 122
Joined: Sat Dec 26, 2015 2:06 pm

Re: Lanz Bulldog mini tractor

Postby un1corn » Sun Dec 02, 2018 3:00 pm

I also have an 8 cylinder micro Aero engine and a lorry with a 2 cylinder under-slung engine amongst many others which I will eventually post.
axel_sch
Posts: 1
Joined: Tue Jun 04, 2019 3:29 pm

Re: Lanz Bulldog mini tractor

Postby axel_sch » Tue Jun 04, 2019 4:32 pm

Hello, I am building the mini tractor lanz, and I would be very useful freecad project. I would really appreciate it if you send it to my mail via pm.
Last edited by Kunda1 on Tue Jun 04, 2019 4:49 pm, edited 1 time in total.
Reason: removed email from post
un1corn
Posts: 122
Joined: Sat Dec 26, 2015 2:06 pm

Re: Lanz Bulldog mini tractor

Postby un1corn » Wed Jun 05, 2019 6:42 am

FAO axel_sch,
Hi, plans for the Lanz mini tractor can be found here.
http://www.vapeuretmodelesavapeur.com/telechargements4/
Good luck with the project.
un1corn
Posts: 122
Joined: Sat Dec 26, 2015 2:06 pm

Re: Lanz Bulldog mini tractor

Postby un1corn » Wed Jun 05, 2019 7:11 am

Hi, If you cannot locate the plans on previous posted link try this one
http://www.vapeuretmodelesavapeur.com/telechargements5/