My First Part

Show off your FreeCAD projects here!
ToddZ
Posts: 5
Joined: Tue Aug 06, 2019 6:06 pm

My First Part

Postby ToddZ » Wed Aug 07, 2019 5:39 pm

Here is the first part that I've milled out entirely using code generated with FreeCAD. I had always used other CAM products to generate G-code for our CNCs in a wood working shop. However I have needed to make a few pieces from aluminum and the usual wood working tool path strategies just don't work very well for cutting out metal. What I needed was a CAM program that could generate Adaptive clearing tool paths and our CAM package does not offer this. So I decided to give the Adaptive tool, in the Path Workbench of FreeCAD a try. it worked splendidly, especially once I figured out how to set up the post processor for my CNC machine.

The part below is only about 2 inches by 5 inches and was cut from 1/4inch 6061 aluminum plate using a 1/4inch carbide O-flute up spiral bit, and fixtured simply on a vacuum table with MDF spoil board. The mill out finish pass had 4 dressup tabs to hold the peice to the stock when cut free.
part.jpg
part.jpg (80.06 KiB) Viewed 667 times
FreeCAD-part.JPG
FreeCAD-part.JPG (249.53 KiB) Viewed 667 times
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16131 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: 3129ae4296e40ed20e7b3d460b86e6969acbe1c3
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
mlampert
Posts: 1258
Joined: Fri Sep 16, 2016 9:28 pm

Re: My First Part

Postby mlampert » Wed Aug 07, 2019 5:46 pm

Awesome! Thanks for sharing.
chrisb
Posts: 16935
Joined: Tue Mar 17, 2015 9:14 am

Re: My First Part

Postby chrisb » Wed Aug 07, 2019 8:50 pm

There is no better proof that things really work.
dubstar-04
Posts: 320
Joined: Mon Mar 04, 2013 8:41 pm

Re: My First Part

Postby dubstar-04 » Fri Aug 09, 2019 6:35 pm

Fantastic!

That looks great. Thanks for sharing.

Dan