Impellar Turbine made in FreeCAD

Show off your FreeCAD projects here!
User avatar
pl7i92LCNC
Posts: 209
Joined: Tue Mar 12, 2019 3:03 pm
Location: RLP DE

Impellar Turbine made in FreeCAD

Postby pl7i92LCNC » Wed Oct 02, 2019 8:57 am

Hi here i gone show you how to do a Fine Real build of a Impellar

phpBB [video]


for any critics i am open
User avatar
Zolko
Posts: 472
Joined: Mon Dec 17, 2018 10:02 am

Re: Impellar Turbine made in FreeCAD

Postby Zolko » Wed Oct 09, 2019 11:07 am

pl7i92LCNC wrote:
Wed Oct 02, 2019 8:57 am
for any critics i am open
I think that an impeller (radial compressor) has 2 stages, even though they are made in 2 part:
  • the central "inlet" part is close to an axial propeller, similar to what you have designed
  • a radial "exhaust" part, that doesn't appear in your design
Image

Image
try the Assembly4 workbench for FreCAD v0.19
install with Tools > Addon Manager > Assembly4 — simple tutorial here
User avatar
pl7i92LCNC
Posts: 209
Joined: Tue Mar 12, 2019 3:03 pm
Location: RLP DE

Re: Impellar Turbine made in FreeCAD

Postby pl7i92LCNC » Wed Oct 09, 2019 3:08 pm

Zolko wrote:
Wed Oct 09, 2019 11:07 am

thank you
can you share your part if it is in FC design

i only got a 200mm 5Axis and not capable of AL it hat a 6mm BALLend bit 80mm long
did you make the g-code with fusion ?
User avatar
Zolko
Posts: 472
Joined: Mon Dec 17, 2018 10:02 am

Re: Impellar Turbine made in FreeCAD

Postby Zolko » Wed Oct 09, 2019 3:18 pm

pl7i92LCNC wrote:
Wed Oct 09, 2019 3:08 pm
can you share your part if it is in FC design

i only got a 200mm 5Axis and not capable of AL it hat a 6mm BALLend bit 80mm long
did you make the g-code with fusion ?
it's not my part, sorry for the misunderstanding, I got it when searching. I was just curious how you managed to do your impeller, that's how I saw your post.

But I don't see how you could machine your part, even with a 5-axis machine.
try the Assembly4 workbench for FreCAD v0.19
install with Tools > Addon Manager > Assembly4 — simple tutorial here
User avatar
pl7i92LCNC
Posts: 209
Joined: Tue Mar 12, 2019 3:03 pm
Location: RLP DE

Re: Impellar Turbine made in FreeCAD

Postby pl7i92LCNC » Wed Oct 09, 2019 4:00 pm

thats why i fear 2
im waiting for a WIN10 PC to deliver
i only got Ubuntu
and Fusion needs win10
to get a Gcode build
User avatar
pl7i92LCNC
Posts: 209
Joined: Tue Mar 12, 2019 3:03 pm
Location: RLP DE

Re: Impellar Turbine made in FreeCAD

Postby pl7i92LCNC » Wed Oct 09, 2019 6:12 pm

here is the NEW Sketch
hope you are fine with that one
impellar_5A.FCStd
(810.07 KiB) Downloaded 58 times
impellar_5a.jpg
impellar_5a.jpg (38.78 KiB) Viewed 1943 times

a smile for the Construct :)
Rana
Posts: 11
Joined: Tue Oct 01, 2019 6:37 pm

Re: Impellar Turbine made in FreeCAD

Postby Rana » Thu Oct 31, 2019 5:33 pm

One try , seeing the image and assumed dimensions.
Attachments
impeller.JPG
impeller.JPG (133.73 KiB) Viewed 1300 times