Benchtop Router Table (finally finished, almost)

DomCa · Postby **DomCa** » Sun Dec 13, 2020 9:17 pm

Hi all,

finally I found the time to build my benchtop router table. This was one of my first designs in freecad. I modelled everything using 0.18 and generated g-code for the table and the insert in 0.18. Now I created the g-code for the fence in 0.19.

I built the table and the insert with the router about a year ago. Today I finished the fence

The table has some flaws and the two movable front pieces are still missing (if I ever make them). I didn't check the design prior to building, since this project was already started so long ago and I wanted to finally finish this.

I attach the freecad files and some images.

The project is complete done with open source tools. Freecad (obvious), and LinuxCNC that powers my CNC.

best regards
DomCa

DomCa · Postby **DomCa** » Sun Dec 13, 2020 9:18 pm

and some more...

DomCa · Postby **DomCa** » Sun Dec 13, 2020 9:26 pm

and now the images

funkysod · Postby **funkysod** » Sun Dec 27, 2020 7:43 pm

Really nice and pro looking!

Benchtop Router Table (finally finished, almost)

Benchtop Router Table (finally finished, almost)

Re: Benchtop Router Table (finally finished, almost)

Re: Benchtop Router Table (finally finished, almost)

Re: Benchtop Router Table (finally finished, almost)