call for screenshots - By Yorik

Show off your FreeCAD projects here!
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
User avatar
jimmihenry
Posts: 238
Joined: Sat Jan 11, 2020 3:36 pm

Re: call for screenshots - By Yorik

Post by jimmihenry »

Agnillev wrote: Thu Nov 04, 2021 11:59 am Overall happy how my hub shell turned out :D
Hey Agnillev, that's a very nice tech. drawing you have made :D.

I couldn't withhold my little doing, well quite some time ago exactly with the release of FreeCAD 0.17 i have made some LED's
of my own. I did not like the KiCAD ones i wanted some more detail. Most difficult part was the decision what design i would
like to go with, choosing from the internet. The CAD design was easy the KiCAD SetUp tool exported the needed formats for
KiCAD. After watching a Youtube video showing a LED under a microscope i decided to refine my old design even even more.
Not for KiCAD this time, just for fun.
Finally i created this one...
Attachments
GreenLED_II.gif
GreenLED_II.gif (833.65 KiB) Viewed 5443 times
User avatar
Aleks
Posts: 309
Joined: Sun Mar 08, 2020 5:27 pm
Location: Bonn, Germany
Contact:

Re: call for screenshots - By Yorik

Post by Aleks »

Agnillev wrote: Thu Nov 04, 2021 11:59 am Overall happy how my hub shell turned out :D
Good job! Especially that you created a real technical drawing.
FreeCAD als Maschinenbauer in die Konstruktion und Fertigung integrieren. Schulung buchen: www.alsado.de/freecad-schulungen
User avatar
Aleks
Posts: 309
Joined: Sun Mar 08, 2020 5:27 pm
Location: Bonn, Germany
Contact:

Re: call for screenshots - By Yorik

Post by Aleks »

Agnillev wrote: Thu Nov 04, 2021 11:59 am Overall happy how my hub shell turned out :D
How did you create the partial cross section (I dont know if thats the correct technical term in english)?
FreeCAD als Maschinenbauer in die Konstruktion und Fertigung integrieren. Schulung buchen: www.alsado.de/freecad-schulungen
User avatar
Aleks
Posts: 309
Joined: Sun Mar 08, 2020 5:27 pm
Location: Bonn, Germany
Contact:

Re: call for screenshots - By Yorik

Post by Aleks »

Here is a technical drawing from me. It still needs surface roughness,edge break annotations and circle center marks. Does anybody know how to add those in 0.19 without "hacking" it by putting in images of the annotations?

253156474_940632096574494_3023009961489352247_n.png
253156474_940632096574494_3023009961489352247_n.png (190.39 KiB) Viewed 5270 times
Unbenannt.png
Unbenannt.png (76.7 KiB) Viewed 5270 times
FreeCAD als Maschinenbauer in die Konstruktion und Fertigung integrieren. Schulung buchen: www.alsado.de/freecad-schulungen
User avatar
Shalmeneser
Veteran
Posts: 9474
Joined: Wed Dec 23, 2020 12:04 am
Location: Fr

Re: call for screenshots - By Yorik

Post by Shalmeneser »

Aleks wrote: Sat Nov 06, 2021 12:08 pm How did you create the partial cross section (I dont know if thats the correct technical term in english)?
Looking in its file, the object is 1/4 cut.
Then a drawing face is hatched.
User avatar
Shalmeneser
Veteran
Posts: 9474
Joined: Wed Dec 23, 2020 12:04 am
Location: Fr

Re: call for screenshots - By Yorik

Post by Shalmeneser »

Aleks wrote: Sat Nov 06, 2021 1:00 pm Here is a technical drawing from me. It still needs surface roughness,edge break annotations and circle center marks. Does anybody know how to add those in 0.19 without "hacking" it by putting in images of the annotations?
https://forum.freecadweb.org/viewtopic.php?f=35&t=61787
User avatar
Aleks
Posts: 309
Joined: Sun Mar 08, 2020 5:27 pm
Location: Bonn, Germany
Contact:

Re: call for screenshots - By Yorik

Post by Aleks »

Thanks. I will try that out.
FreeCAD als Maschinenbauer in die Konstruktion und Fertigung integrieren. Schulung buchen: www.alsado.de/freecad-schulungen
User avatar
mhalil
Posts: 212
Joined: Tue Dec 01, 2020 6:42 pm
Location: İstanbul / Türkiye
Contact:

Re: call for screenshots - By Yorik

Post by mhalil »

GlouGlou wrote: Fri Aug 20, 2021 8:11 pm From actual mechanical parts.
Excellent.
I love it. :D
User avatar
Agnillev
Posts: 32
Joined: Thu Aug 05, 2021 8:04 am

Re: call for screenshots - By Yorik

Post by Agnillev »

Aleks wrote: Sat Nov 06, 2021 12:08 pm
Agnillev wrote: Thu Nov 04, 2021 11:59 am Overall happy how my hub shell turned out :D
How did you create the partial cross section (I dont know if thats the correct technical term in english)?
I had to make a quarter cut in the part itself. I would have liked to do this in Techdraw this is a workaround.
User avatar
jimmihenry
Posts: 238
Joined: Sat Jan 11, 2020 3:36 pm

Re: call for screenshots - By Yorik

Post by jimmihenry »

Guess the interchangeable feature between FreeCAD and KiCAD makes lot of people very happy. I am not a electronics guy,
however i accidentality downloaded KiCAD and before i noticed i made a PCB :shock:. Despite the fact KiCAD offers a huge parts
library i couldn't find the heat-sink i already bought, unfortunately. So i had to learn how to make my own. I succeeded
creating all the parts needed, the 3D model and all the other parts...

You also bought this 30x25x25mm heat-sink? Feel free to download it from here: https://grabcad.com/library/heatsink-30 ... or-kicad-1
If you follow the link please read the description, i also added the seller i bought the hardware from!

P.S.: It took me some time to figure out what the two bosses on the heat-sink are for :? . These could keep distance to the
PCB but they are for stability...
Attachments
Heatsink.gif
Heatsink.gif (777.97 KiB) Viewed 4980 times
Heatsink Combo 640x480.jpeg
Heatsink Combo 640x480.jpeg (72.71 KiB) Viewed 4980 times
Post Reply