call for screenshots - By Yorik
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: call for screenshots - By Yorik
- Attachments
-
- Capture.JPG (145.1 KiB) Viewed 11781 times
Last edited by rmmah on Sun May 23, 2021 1:40 pm, edited 1 time in total.
Re: call for screenshots - By Yorik
Great job! Note: please consider posting FreeCAD v0.19 videos to youtube instead of v0.18. Thanks!
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: call for screenshots - By Yorik
Hello Kunda 1
Did you Watch the video , I try to introduce a new features that make the modelling better and faster, i'm Sure the main developer could implement better than what i did
FreeCad v0.19 better than v0.18 but the problem on me, because i'm not familiar with PyQt5
- jimmihenry
- Posts: 238
- Joined: Sat Jan 11, 2020 3:36 pm
Re: call for screenshots - By Yorik
Hi,
here is my Crimp Connector... It is one body.
Image 01.
And a v-bit for engraving, 100% pointy/ sharp. No flat or rounded tip!
It took a workaround to achieve this geometry due the method i attempted
first did not allow a sharp/ pointy tip.
Image 2.
Cheers.
here is my Crimp Connector... It is one body.
Image 01.
And a v-bit for engraving, 100% pointy/ sharp. No flat or rounded tip!
It took a workaround to achieve this geometry due the method i attempted
first did not allow a sharp/ pointy tip.
Image 2.
Cheers.
- Attachments
-
- Crimp Terminal.gif (788.42 KiB) Viewed 4110 times
-
- V-Bit.gif (589.86 KiB) Viewed 4110 times
Last edited by jimmihenry on Tue Oct 12, 2021 2:41 am, edited 1 time in total.
- OficineRobotica
- Posts: 433
- Joined: Thu Feb 21, 2019 8:17 am
- Contact:
Re: call for screenshots - By Yorik
Bk12 screw holder and 10x10 shaft motor coupler modeled in FreeCAD Linkstage3. Other than really enjoying modeling the components, I'm posting this to showcase the current render quality of the new ExperimentalRenderer (key word: experimental) .
You can learn more about Realthunder's roadmap here: https://youtu.be/-K1EVcYAmRM?t=1448
Support Realthunder's endeavour here: https://www.patreon.com/thundereal
You can learn more about Realthunder's roadmap here: https://youtu.be/-K1EVcYAmRM?t=1448
Support Realthunder's endeavour here: https://www.patreon.com/thundereal
Check out my Youtube channel at: https://www.youtube.com/@OficineRobotica
- jimmihenry
- Posts: 238
- Joined: Sat Jan 11, 2020 3:36 pm
Re: call for screenshots - By Yorik
This is a Hextronik 24g BL- Motor, there are more knock off's as i know. The original motor is called Blue Wonder.
A highly efficient motor for a slow flyer. It runs on a three cell LIPo (11,1Volts) and drives a huge prop for it size 8"
(203,2mm).
Cheers
A highly efficient motor for a slow flyer. It runs on a three cell LIPo (11,1Volts) and drives a huge prop for it size 8"
(203,2mm).
Cheers
- Attachments
-
- Hextronik 24g BL.gif (910.66 KiB) Viewed 4025 times
Last edited by jimmihenry on Thu Oct 14, 2021 1:26 am, edited 2 times in total.
-
- Posts: 15
- Joined: Sun Aug 23, 2020 12:50 pm
Re: call for screenshots - By Yorik
This is a male version of the humanoid robot made with same workflow as this thread:
https://forum.freecadweb.org/viewtopic.php?f=24&t=60239
The inner endoskeleton made by subtracting 5mm shell from a 2mm shell leaving al 3mm internal shell (yellow) to which 2mm body shell parts (purple / blue) are attached with perfect mating of surfaces.
https://forum.freecadweb.org/viewtopic.php?f=24&t=60239
The inner endoskeleton made by subtracting 5mm shell from a 2mm shell leaving al 3mm internal shell (yellow) to which 2mm body shell parts (purple / blue) are attached with perfect mating of surfaces.
- jimmihenry
- Posts: 238
- Joined: Sat Jan 11, 2020 3:36 pm
Re: call for screenshots - By Yorik
Hi, this is called a Happy Style Arcade Button it is made 100% in FreeCAD. Even the Animation is
made with a FreeCAD Macro called Screen Wiki .
Cheers.
made with a FreeCAD Macro called Screen Wiki .
Cheers.
- Attachments
-
- Happy Button.gif (700.63 KiB) Viewed 4025 times
Last edited by jimmihenry on Thu Oct 14, 2021 1:29 am, edited 2 times in total.
Re: call for screenshots - By Yorik
And a raytraced render done in Blender