Here is my first successful woodworking project with FreeCad .19, made for a family member.
I used the A2plus, Fasteners and Path work benches. The boards were all cut with a miter and table saw then connected together with pocket screws (not shown). Most of the board edges were smoothed over with a trim router round over bit. The swing out kneeler will be covered with padded upholstery.
The cross cutout was made with from a router template created in another file and was cut on a CNC on 5mm plywood. The g-code for the router template was generated with the Path workbench.
Prie-dieu - First woodworking project with FreeCad!
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Prie-dieu - First woodworking project with FreeCad!
- Attachments
-
- Prie-dieu_assembly.FCStd
- (67.69 KiB) Downloaded 56 times
Re: Prie-dieu - First woodworking project with FreeCad!
It woluld be nice one photo in the real world.
Re: Prie-dieu - First woodworking project with FreeCad!
The project was made from reclaimed pine boards and still need to be sanded and painted.
Using reclaimed wood in my projects was not something I had given much thought to in the past. But now that lumber prices have sky rocketed, I am giving it a lot more consideration lately.