Office doors

Show off your FreeCAD projects here!
User avatar
apeltauer
Posts: 379
Joined: Fri Aug 11, 2017 2:19 pm

Re: Office doors

Postby apeltauer » Thu Jun 17, 2021 9:10 am

babaroga wrote: Mon Jun 14, 2021 11:48 am
Nice work with the cnc. Maybe you want to check out our cad/cam software NC-Hops. Works great with any Biesse CNC….
www.direkt.net

Keep posting your working… :)
User avatar
babaroga
Posts: 146
Joined: Sun Aug 14, 2016 6:52 pm
Location: Banja Luka, Republic of Srpska, Bosnia and Herzegovina

Re: Office doors

Postby babaroga » Thu Jun 17, 2021 9:45 am

apeltauer wrote: Thu Jun 17, 2021 9:10 am
babaroga wrote: Mon Jun 14, 2021 11:48 am
Nice work with the cnc. Maybe you want to check out our cad/cam software NC-Hops. Works great with any Biesse CNC….
www.direkt.net

Keep posting your working… :)
I worked with NC-Hops in one of my former companies. It was on Holz-Her Eco master. On other machine we had TwinCAM and I really liked it. It was around 2010.

Right now, Bsolid works OK, with some glitches. It is new machine and our workers are still adopting. Maybe in future...

Does it work with 5-axis milling head?
User avatar
apeltauer
Posts: 379
Joined: Fri Aug 11, 2017 2:19 pm

Re: Office doors

Postby apeltauer » Thu Jun 17, 2021 11:53 am

babaroga wrote: Thu Jun 17, 2021 9:45 am Does it work with 5-axis milling head?
Yes, NC-Hops also provides 5-axis machining…
User avatar
babaroga
Posts: 146
Joined: Sun Aug 14, 2016 6:52 pm
Location: Banja Luka, Republic of Srpska, Bosnia and Herzegovina

Re: Office doors

Postby babaroga » Thu Jun 17, 2021 12:07 pm

OK, I will keep it on mind. In my neghborhood, there is lot of CNC machines with aged software. With retrofitting, there is always problem of CAM. I will recommend you.
User avatar
apeltauer
Posts: 379
Joined: Fri Aug 11, 2017 2:19 pm

Re: Office doors

Postby apeltauer » Thu Jun 17, 2021 12:31 pm

babaroga wrote: Thu Jun 17, 2021 12:07 pm OK, I will keep it on mind. In my neghborhood, there is lot of CNC machines with aged software. With retrofitting, there is always problem of CAM. I will recommend you.
:+1: