Zombie project, or small conversion FC16->FC20
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Zombie project, or small conversion FC16->FC20
Hi,
I decided to reanimate a bit old project of mine - https://forum.freecadweb.org/viewtopic.php?f=24&t=5728 - it is Polish steam locomotive Ol49.
For now i will be converting files from FC16/FC17 to FC20 with some changes where new functionality will allow them. And when all files will be in new FC, then will be time to continue that revived project...
Project was put on hold when it was at that stage:
Progres for now:
main frame elements:
FC file: https://para.zonk.pl/Ol49forum/01/P202-1-0.fcstd
connectors between them:
FC file: https://para.zonk.pl/Ol49forum/01/P212-1-0.fcstd
FC file: https://para.zonk.pl/Ol49forum/01/8.18-01.fcstd
and pipes for steam exhaust
FC file: https://para.zonk.pl/Ol49forum/01/P672-1-0.fcstd
Will see how far i will progress with that...
I decided to reanimate a bit old project of mine - https://forum.freecadweb.org/viewtopic.php?f=24&t=5728 - it is Polish steam locomotive Ol49.
For now i will be converting files from FC16/FC17 to FC20 with some changes where new functionality will allow them. And when all files will be in new FC, then will be time to continue that revived project...
Project was put on hold when it was at that stage:
Progres for now:
main frame elements:
FC file: https://para.zonk.pl/Ol49forum/01/P202-1-0.fcstd
connectors between them:
FC file: https://para.zonk.pl/Ol49forum/01/P212-1-0.fcstd
FC file: https://para.zonk.pl/Ol49forum/01/8.18-01.fcstd
and pipes for steam exhaust
FC file: https://para.zonk.pl/Ol49forum/01/P672-1-0.fcstd
Will see how far i will progress with that...
Last edited by wieszak17 on Sun Apr 16, 2023 9:40 am, edited 2 times in total.
Re: Zombie project, or small conversion FC16->FC20
Will follow with interest - hope you manage to get it going again
Re: Zombie project, or small conversion FC16->FC20
Awesome! I just looked at your first sketch (frame)... how many hours did it take to put all this together? I'm thinking wow hours.
May whatever Higher Power you believe in bless the Ukrainians. They are a decent people who never hurt anybody.
Re: Zombie project, or small conversion FC16->FC20
KurtF: Not that much, it is rather simple job, you just need some patience to do it. I think it was about hour.
Next parts (unfortunately i usually do not know proper english names for them...):
-some parts are very simple, here are handrails on front bumper:
https://para.zonk.pl/Ol49forum/fcstd/02/9.11-0-1.fcstd
-part of connector locomotive-tender:
https://para.zonk.pl/Ol49forum/fcstd/02/10.04-0-2.fcstd
-guide for front coupler:
https://para.zonk.pl/Ol49forum/fcstd/02/10.20-0.fcstd
-another connector between frames:
https://para.zonk.pl/Ol49forum/fcstd/02/P213-1-0.fcstd
-support for boiler:
https://para.zonk.pl/Ol49forum/fcstd/02/P215-1-0.fcstd
-doors for smokebox:
https://para.zonk.pl/Ol49forum/fcstd/06/P663-1-0.fcstd
-joint/nut for regulation in steam engine:
https://para.zonk.pl/Ol49forum/fcstd/05/21.11.fcstd
-and something bit more complicated - wooden floor in cab:
https://para.zonk.pl/Ol49forum/fcstd/04/P410-1-0.fcstd
Next parts (unfortunately i usually do not know proper english names for them...):
-some parts are very simple, here are handrails on front bumper:
https://para.zonk.pl/Ol49forum/fcstd/02/9.11-0-1.fcstd
-part of connector locomotive-tender:
https://para.zonk.pl/Ol49forum/fcstd/02/10.04-0-2.fcstd
-guide for front coupler:
https://para.zonk.pl/Ol49forum/fcstd/02/10.20-0.fcstd
-another connector between frames:
https://para.zonk.pl/Ol49forum/fcstd/02/P213-1-0.fcstd
-support for boiler:
https://para.zonk.pl/Ol49forum/fcstd/02/P215-1-0.fcstd
-doors for smokebox:
https://para.zonk.pl/Ol49forum/fcstd/06/P663-1-0.fcstd
-joint/nut for regulation in steam engine:
https://para.zonk.pl/Ol49forum/fcstd/05/21.11.fcstd
-and something bit more complicated - wooden floor in cab:
https://para.zonk.pl/Ol49forum/fcstd/04/P410-1-0.fcstd
Last edited by wieszak17 on Fri Mar 24, 2023 12:38 pm, edited 1 time in total.
Re: Zombie project, or small conversion FC16->FC20
BTW why Ol49 ? why not something sexy like Pt47
and just to prove that I am not prejudiced
and just to prove that I am not prejudiced
Re: Zombie project, or small conversion FC16->FC20
Bambuko: more complete source drawings. There is still no tender drawings for Pt47 - I could use 27D51 tender (from Ty51), but I didn't want to trace all changes made to 33D47 (tender for Pt47) when it was adapted to Ty51.
Re: Zombie project, or small conversion FC16->FC20
Thank you for the explanation - I have missed the lack of tender drawings
Re: Zombie project, or small conversion FC16->FC20
Ok, six next parts:
-support for cab's floor:
https://para.zonk.pl/Ol49forum/fcstd/02/P218-1-0.fcstd
-front bumper:
https://para.zonk.pl/Ol49forum/fcstd/02/P220-1-0.fcstd
-boiler support: (here I was unable to recreate one of fillets, i don't know if this is regression or part need to be more redesigned)
https://para.zonk.pl/Ol49forum/fcstd/02/P221-1-0.fcstd
-clamps for boiler support:
https://para.zonk.pl/Ol49forum/fcstd/02/P222-1-0.fcstd
-side walking boards support:
https://para.zonk.pl/Ol49forum/fcstd/02/P223-1-0.fcstd
-connector between frames also support for breaking cylinder
https://para.zonk.pl/Ol49forum/fcstd/02/P224-1-0.fcstd
And first assembly try - it starting to take shape. Todays parts are colored.
-support for cab's floor:
https://para.zonk.pl/Ol49forum/fcstd/02/P218-1-0.fcstd
-front bumper:
https://para.zonk.pl/Ol49forum/fcstd/02/P220-1-0.fcstd
-boiler support: (here I was unable to recreate one of fillets, i don't know if this is regression or part need to be more redesigned)
https://para.zonk.pl/Ol49forum/fcstd/02/P221-1-0.fcstd
-clamps for boiler support:
https://para.zonk.pl/Ol49forum/fcstd/02/P222-1-0.fcstd
-side walking boards support:
https://para.zonk.pl/Ol49forum/fcstd/02/P223-1-0.fcstd
-connector between frames also support for breaking cylinder
https://para.zonk.pl/Ol49forum/fcstd/02/P224-1-0.fcstd
And first assembly try - it starting to take shape. Todays parts are colored.
Last edited by wieszak17 on Fri Mar 24, 2023 12:38 pm, edited 1 time in total.
Re: Zombie project, or small conversion FC16->FC20
What are you using for assembly?
I am looking forward to fully animated motion
I also see that you are not using links in your models?
Is it because they are old v16 models?
I am looking forward to fully animated motion
I also see that you are not using links in your models?
Is it because they are old v16 models?
Re: Zombie project, or small conversion FC16->FC20
bambuko: Only Parts/Parts Design workbenches are used. I just put part in correct position and that's all - in this project i think there is no need for any assembly workbench, it is recreation of something ready, not designing something new.
Files are newly created, only sketches and sometimes starting pads or revolves are copied from old file. There is practically no way to use old files otherwise - any attempt to convert them ends in mess, crash or both.
Files are newly created, only sketches and sometimes starting pads or revolves are copied from old file. There is practically no way to use old files otherwise - any attempt to convert them ends in mess, crash or both.