Problema all'avvio di FC

Forum per le domande e le discussioni in Italiano
Forum rules
regole del forum e le informazioni utili

Importante: PRIMA di chiedere aiuto leggete qui!
Post Reply
renatorivo
Veteran
Posts: 2611
Joined: Tue Feb 21, 2012 8:07 pm
Location: Torino - Italy

Re: Problema all'avvio di FC

Post by renatorivo »

Ukacor wrote: ↑Fri Aug 28, 2020 9:35 am in Dos dal Prompt dei comandi
Dall'icona di windows in basso a sinistra.

Apri la cartella bin che contiene l'eseguibile freecad.exe. Non cliccare sull'eseguibile.
Clicca sull'icona di windows e apri anche Esegui
Nella cartella bin clicca sulla barra dell'indirizzo in alto che diventa blu, e poi clic destro e scegli Copia indirizzo
Incolla l'indirizzo nella finestra Esegui poi aggiungi il comando e l'opzione cioè questo che puoi copiare da qui

Code: Select all

\freecad.exe -l
Clicca su OK e parte l'avvio.

Il log lo trovi con il nome FreeCAD.log in C:\Users\User\AppData\Roaming\FreeCAD. Nel tuo sistema AppData potrebbe essere una cartella nascosta.
Top
Ukacor
Posts: 128
Joined: Wed Mar 20, 2019 9:58 am
Location: Marche

Re: Problema all'avvio di FC

Post by Ukacor »

Molto bene Renatorivo. Intanto ho imparato una cosa nuova!

Il risultato è questo:

Msg: FreeCAD 0.19, Libs: 0.19R22284 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2020
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
##### #### ### ####
# # # # # #
# ## #### #### # # # # #
#### # # # # # # # ##### # #
# # #### #### # # # # #
# # # # # # # # # ## ## ##
# # #### #### ### # # #### ## ## ##

Log: Time = Fri Aug 28 15:51:43 2020
Log: AppDataSkipVendor = true
Log: AppHomePath = D:/Download/FreeCAD/Freecad 0-19/FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64/
Log: AppIcon = freecad
Log: AppTempPath = C:\Users\andre\AppData\Local\Temp\
Log: BinPath = D:/Download/FreeCAD/Freecad 0-19/FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64/bin\
Log: BuildRepositoryURL = D:ldgit_cachegithub.comFreeCADFreeCAD master
Log: BuildRevision = 22284 (Git)
Log: BuildRevisionBranch = master
Log: BuildRevisionDate = 2020/08/22 18:25:10
Log: BuildRevisionHash = bf1e8e48389f5e9e25bd77b67fe98da4213e797c
Log: BuildVersionMajor = 0
Log: BuildVersionMinor = 19
Log: Console = 0
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2020
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
##### #### ### ####
# # # # # #
# ## #### #### # # # # #
#### # # # # # # # ##### # #
# # #### #### # # # # #
# # # # # # # # # ## ## ##
# # #### #### ### # # #### ## ## ##


Log: Debug = 0
Log: DocPath = D:/Download/FreeCAD/Freecad 0-19/FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64/doc\
Log: ExeName = FreeCAD
Log: ExeVendor = FreeCAD
Log: ExeVersion = 0.19
Log: LoggingConsole = 1
Log: LoggingFile = 1
Log: LoggingFileName = C:\Users\andre\AppData\Roaming\FreeCAD\FreeCAD.log
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page
Log: PATH = C:\Program Files (x86)\Common Files\Intel\Shared Libraries\redist\ia32_win\mpirt;C:\Program Files (x86)\Common Files\Intel\Shared Libraries\redist\ia32_win\compiler;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\System32\OpenSSH\;C:\Program Files\UniConvertor-2.0rc4\;C:\Users\andre\AppData\Local\Microsoft\WindowsApps;
Log: PythonSearchPath = D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\bin\python38.zip;D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\bin\DLLs;D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\bin\lib;D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\bin
Log: RunMode = Gui
Log: SplashAlignment = Bottom|Left
Log: SplashInfoColor = #c8c8c8
Log: SplashScreen = freecadsplash
Log: SplashTextColor = #ffffff
Log: StartWorkbench = StartWorkbench
Log: SystemParameter = C:\Users\andre\AppData\Roaming\FreeCAD\system.cfg
Log: UserAppData = C:\Users\andre\AppData\Roaming\FreeCAD\
Log: UserHomePath = C:\Users\andre\Documents
Log: UserParameter = C:\Users\andre\AppData\Roaming\FreeCAD\user.cfg
Log: Verbose =
Log: Create Application
Log: Run App init script
Log: Init: starting App::FreeCADInit.py
Log: Init: Searching for modules...
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\AddonManager... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Arch... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Complete... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Draft... done
Log: Drawing became obsolete in 0.17; consider using TechDraw instead.
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Drawing... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Fem... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Idf... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Image... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Import... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Inspection... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Material... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Measure... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Mesh... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\MeshPart... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\OpenSCAD... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Part... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\PartDesign... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Path... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Points... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Raytracing... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\ReverseEngineering... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Robot... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Show(Init.py not found)... ignore
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Sketcher... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Spreadsheet... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Start... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Surface... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\TechDraw... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Test... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Tux(Init.py not found)... ignore
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Web... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\3D_Printing_Tools(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\A2plus... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\AirPlaneDesign(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ArchTextures... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Assembly4... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BCFPlugin(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIM(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIMBots(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BOLTSFC(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CfdOF... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CurvedShapes... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Curves(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\dodo... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\DynamicData... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ExplodedAssembly(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\fasteners... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\FCGear(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\frame(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\GDML(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Glass(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\lattice2(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Manipulator... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\nurbs(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Plot(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reinforcement(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Render(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reporting... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\sheetmetal... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Silk... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ThreadProfile... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature(Init.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature-macro(Init.py not found)... ignore
Log: Init: Initializing freecad.plot
Log: Init: No init module found in freecad.plot, skipping
Log: Init: Initializing freecad.gdml
Log: Init: No init module found in freecad.gdml, skipping
Log: Init: Initializing freecad.frametools
Log: Init: No init module found in freecad.frametools, skipping
Log: Init: Initializing freecad.gears
Log: Init: No init module found in freecad.gears, skipping
Log: Init: Initializing freecad.asm3
Log: Init: No init module found in freecad.asm3, skipping
Log: Using D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod as module path!
Log: System path after init:
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\bin
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\AddonManager
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Arch
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Complete
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Draft
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Drawing
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Fem
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Idf
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Image
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Import
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Inspection
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Material
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Measure
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Mesh
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\MeshPart
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\OpenSCAD
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Part
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\PartDesign
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Path
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Points
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Raytracing
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\ReverseEngineering
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Robot
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Show
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Sketcher
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Spreadsheet
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Start
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Surface
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\TechDraw
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Test
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Tux
Log: D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Web
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\3D_Printing_Tools
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\A2plus
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\AirPlaneDesign
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ArchTextures
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Assembly4
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BCFPlugin
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIM
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIMBots
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BOLTSFC
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CfdOF
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CurvedShapes
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Curves
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\dodo
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\DynamicData
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ExplodedAssembly
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\fasteners
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\FCGear
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\frame
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\GDML
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Glass
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\lattice2
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Manipulator
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\nurbs
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Plot
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reinforcement
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Render
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reporting
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\sheetmetal
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Silk
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ThreadProfile
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature
Log: C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature-macro
Log: C:\Program Files (x86)\Common Files\Intel\Shared Libraries\redist\ia32_win\mpirt
Log: C:\Program Files (x86)\Common Files\Intel\Shared Libraries\redist\ia32_win\compiler
Log: C:\Windows\system32
Log: C:\Windows
Log: C:\Windows\System32\Wbem
Log: C:\Windows\System32\WindowsPowerShell\v1.0\
Log: C:\Windows\System32\OpenSSH\
Log: C:\Program Files\UniConvertor-2.0rc4\
Log: C:\Users\andre\AppData\Local\Microsoft\WindowsApps
Log:
Log: Init: App::FreeCADInit.py done
Log: Init: Creating Gui::Application and QApplication
Log: Local server 'FreeCAD' started
Log: OpenGL version is: 4.6 (4.6.0 NVIDIA 441.12)
Log: Run Gui init script
Log: Init: Running FreeCADGuiInit.py start script...
Log: Init: Searching modules...
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\AddonManager... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Arch... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Complete... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Draft... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Drawing... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Fem... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Idf(InitGui.py not found)... ignore
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Image... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Import... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Inspection... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Material... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Measure(InitGui.py not found)... ignore
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Mesh... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\MeshPart... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\OpenSCAD... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Part... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\PartDesign... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Path... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Points... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Raytracing... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\ReverseEngineering... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Robot... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Show(InitGui.py not found)... ignore
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Sketcher... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Spreadsheet... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Start... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Surface... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\TechDraw... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Test... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Tux... done
Log: Init: Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Web... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\3D_Printing_Tools... done
Log: Module: Part
Log: Loading Part module... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\A2plus... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\AirPlaneDesign... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ArchTextures... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Assembly4... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BCFPlugin(InitGui.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIM... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIMBots(InitGui.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BOLTSFC(InitGui.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CfdOF... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CurvedShapes... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Curves... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\dodo... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\DynamicData... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ExplodedAssembly... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\fasteners... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\FCGear(InitGui.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\frame(InitGui.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\GDML(InitGui.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Glass... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\lattice2... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Manipulator... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\nurbs... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Plot(InitGui.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reinforcement(InitGui.py not found)... ignore
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Render... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reporting... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\sheetmetal... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Silk... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ThreadProfile... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature... done
Log: Init: Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature-macro(InitGui.py not found)... ignore
Log: Init: Initializing freecad.plot
Log: Init: Initializing freecad.plot... done
Log: Init: Initializing freecad.gdml
Log: Loading GUI of Part module... done
Log: Init: Initializing freecad.gdml... done
Log: Init: Initializing freecad.frametools
Log: Init: Initializing freecad.frametools... done
Log: Init: Initializing freecad.gears
Log: Init: Initializing freecad.gears... done
Log: Init: Initializing freecad.asm3
Log: Init: Initializing freecad.asm3... done
Log: Init: Loading FreeCAD GUI
Err: Traceback (most recent call last):
File "<string>", line 200, in <module>
<class 'Base.FreeCADError'>: NoneWorkbench: Access violation
Err: Error in FreeCADGuiInit.py: NoneWorkbench: Access violation
Log: Destruct Gui::Application


Quali problemi puoi riscontrare a Tuo parere? Intuitivamente mi sembra ce ne siano ma non so a cosa siano dovuti.

Mi fai sapere? Grazie.
Top
Ukacor
Posts: 128
Joined: Wed Mar 20, 2019 9:58 am
Location: Marche

Re: Problema all'avvio di FC

Post by Ukacor »

Ho la tentazione di cancellare tutto anche da AppData e rifare l'installazione da zero. Che ne dici?
Top
User avatar
onekk
Veteran
Posts: 6205
Joined: Sat Jan 17, 2015 7:48 am
Contact:
Contact onekk

Re: Problema all'avvio di FC

Post by onekk »

Cancellare tutto in AppData, oppure spostare il contenuto da qualche parte potrebbe essere un'ottima soluzione.

A volte in quelle cartelle rimangono vecchi moduli o vecchie impostazione che la versione nuove ovviamente ricarica, però alcune volte le cose si complicano, ed è meglio usare questo approccio:

1) Spostare o rinominare la cartella
2) avviare il programma e vedere se parte senza errori.

Nel caso tu abbia workbench personalizzati o altro, copiare ad uno ad uno i workbench (a meno che non sia possibile ricaricarli direttamente da FreeCAD) e vedere se qualcuno crea problemi.

La cosa è valida nelle versioni di sviluppo e quando si passa da una versione all'altra (0.18 -> 0.19 ad esempio)

A volte i workbench non sono direttamente caricabili da FreeCAD, ma vanno scaricati da altri siti ed in questo caso l'approccio "graduale" è "fortemente cosnigliato".

Ora non conoscendo windows in modo approfondito, non so quando sia "semplice" copiare alcune cartelle, (mi dicono che siano "nascoste" e a volte non gestibili come "utente normale"), però a volte è l'unico modo per capire qual'è il "pezzo di software" che crea problemi.

Saluti

Carlo D.
GitHub page: https://github.com/onekk/freecad-doc.
- In deep articles on FreeCAD.
- Learning how to model with scripting.
- Various other stuffs.

Blog: https://okkmkblog.wordpress.com/
Top
renatorivo
Veteran
Posts: 2611
Joined: Tue Feb 21, 2012 8:07 pm
Location: Torino - Italy

Re: Problema all'avvio di FC

Post by renatorivo »

Aspetta,
nella cartella C:\Users\User\AppData\Roaming\FreeCAD prima prova a cancellare o meglio rinomina i file user.cfg e system.cfg in user.old e system.old o qualcosa di simile per poterli eventualmente recuperare, poi prova un nuovo avvio.

I file *.cfg vengono ricreati automaticamente secondo le impostazioni standard, quindi perdi eventuali personalizzazioni, ma si possono recuperare in seguito con i vecchi file di configurazione. Vedi se cambia qualcosa.

Metti il log dentro i tag codice (quinto pulsante di questa finestra in modalità editazione in modo da occupare meno spazio. Clic sul pulsante e poi incolli il testo tra la parentesi chiusa e quella successiva aperta

Code: Select all

[...]qui in mezzo[...]
Da una versione che sia avvia estrai anche le informazioni sul tuo sistema, per vedere quale versione di Coin usi.

AppData non va cancellata, contiene info anche per altre applicazioni, eventualmente si rinomina la cartella FreeCAD in Roaming.
In genere rifare l'installazione non porta benefici, ed è l'ultima cosa da fare. Le versioni dev funzionano in modo autonomo, salvo appunto la configurazione.

Dal tuo log emergono diversi problemi che non sono però molto importanti, ma l'avvio si interrompe quando inizia a caricare la GUI. Puoi anche fare il confronto con il mio log allegato in precedenza.

Code: Select all

Log: Init: Loading FreeCAD GUI
Err: Traceback (most recent call last):
File "<string>", line 200, in <module>
<class 'Base.FreeCADError'>: NoneWorkbench: Access violation
Err: Error in FreeCADGuiInit.py: NoneWorkbench: Access violation
Log: Destruct Gui::Application
Per aiutare gli sviluppatori bisogna fornire più informazioni possibili.
Top
Ukacor
Posts: 128
Joined: Wed Mar 20, 2019 9:58 am
Location: Marche

Re: Problema all'avvio di FC

Post by Ukacor »

renatorivo wrote: ↑Fri Aug 28, 2020 3:32 pm Aspetta,
nella cartella C:\Users\User\AppData\Roaming\FreeCAD prima prova a cancellare o meglio rinomina i file user.cfg e system.cfg in user.old e system.old o qualcosa di simile per poterli eventualmente recuperare, poi prova un nuovo avvio.

I file *.cfg vengono ricreati automaticamente secondo le impostazioni standard, quindi perdi eventuali personalizzazioni, ma si possono recuperare in seguito con i vecchi file di configurazione. Vedi se cambia qualcosa.

Metti il log dentro i tag codice (quinto pulsante di questa finestra in modalità editazione in modo da occupare meno spazio. Clic sul pulsante e poi incolli il testo tra la parentesi chiusa e quella successiva aperta

Code: Select all

[...]qui in mezzo[...]
Da una versione che sia avvia estrai anche le informazioni sul tuo sistema, per vedere quale versione di Coin usi.

AppData non va cancellata, contiene info anche per altre applicazioni, eventualmente si rinomina la cartella FreeCAD in Roaming.
In genere rifare l'installazione non porta benefici, ed è l'ultima cosa da fare. Le versioni dev funzionano in modo autonomo, salvo appunto la configurazione.

Dal tuo log emergono diversi problemi che non sono però molto importanti, ma l'avvio si interrompe quando inizia a caricare la GUI. Puoi anche fare il confronto con il mio log allegato in precedenza.

Code: Select all

Log: Init: Loading FreeCAD GUI
Err: Traceback (most recent call last):
File "<string>", line 200, in <module>
<class 'Base.FreeCADError'>: NoneWorkbench: Access violation
Err: Error in FreeCADGuiInit.py: NoneWorkbench: Access violation
Log: Destruct Gui::Application
Per aiutare gli sviluppatori bisogna fornire più informazioni possibili.

Adesso provo la Tua soluzione poi Ti aggiorno.

Renatorivo, sei sempre preziosissimo. Io intendevo cancellare Freecad di Appdata; non mi sognerei mai di cancellare perintero "Appdata" perché che sia vitale ne ero a conoscenza. L'ignoranza dei non programmatori è sempre pericolosa, quindi, hai fatto bene a mettermi in guardia.
Top
Ukacor
Posts: 128
Joined: Wed Mar 20, 2019 9:58 am
Location: Marche

Re: Problema all'avvio di FC

Post by Ukacor »

onekk wrote: ↑Fri Aug 28, 2020 3:27 pm Cancellare tutto in AppData, oppure spostare il contenuto da qualche parte potrebbe essere un'ottima soluzione.

A volte in quelle cartelle rimangono vecchi moduli o vecchie impostazione che la versione nuove ovviamente ricarica, però alcune volte le cose si complicano, ed è meglio usare questo approccio:

1) Spostare o rinominare la cartella
2) avviare il programma e vedere se parte senza errori.

Nel caso tu abbia workbench personalizzati o altro, copiare ad uno ad uno i workbench (a meno che non sia possibile ricaricarli direttamente da FreeCAD) e vedere se qualcuno crea problemi.

La cosa è valida nelle versioni di sviluppo e quando si passa da una versione all'altra (0.18 -> 0.19 ad esempio)

A volte i workbench non sono direttamente caricabili da FreeCAD, ma vanno scaricati da altri siti ed in questo caso l'approccio "graduale" è "fortemente cosnigliato".

Ora non conoscendo windows in modo approfondito, non so quando sia "semplice" copiare alcune cartelle, (mi dicono che siano "nascoste" e a volte non gestibili come "utente normale"), però a volte è l'unico modo per capire qual'è il "pezzo di software" che crea problemi.

Saluti

Carlo D.
Grazie Onekk. Non sono così evoluto da personalizzare le WB. Ora provo la soluzione di Renatorivo.
Top
Ukacor
Posts: 128
Joined: Wed Mar 20, 2019 9:58 am
Location: Marche

Re: Problema all'avvio di FC

Post by Ukacor »

Code: Select all

sg: FreeCAD 0.19, Libs: 0.19R22284 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2020
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##

Log: Time = Fri Aug 28 18:38:50 2020
Log: AppDataSkipVendor = true
Log: AppHomePath = D:/Download/FreeCAD/Freecad 0-19/FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64/
Log: AppIcon = freecad
Log: AppTempPath = C:\Users\andre\AppData\Local\Temp\
Log: BinPath = D:/Download/FreeCAD/Freecad 0-19/FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64/bin\
Log: BuildRepositoryURL = D:ldgit_cachegithub.comFreeCADFreeCAD master
Log: BuildRevision = 22284 (Git)
Log: BuildRevisionBranch = master
Log: BuildRevisionDate = 2020/08/22 18:25:10
Log: BuildRevisionHash = bf1e8e48389f5e9e25bd77b67fe98da4213e797c
Log: BuildVersionMajor = 0
Log: BuildVersionMinor = 19
Log: Console = 0
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2020
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##


Log: Debug = 0
Log: DocPath = D:/Download/FreeCAD/Freecad 0-19/FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64/doc\
Log: ExeName = FreeCAD
Log: ExeVendor = FreeCAD
Log: ExeVersion = 0.19
Log: LoggingConsole = 1
Log: LoggingFile = 1
Log: LoggingFileName = C:\Users\andre\AppData\Roaming\FreeCAD\FreeCAD.log
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page
Log: PATH = C:\Program Files (x86)\Common Files\Intel\Shared Libraries\redist\ia32_win\mpirt;C:\Program Files (x86)\Common Files\Intel\Shared Libraries\redist\ia32_win\compiler;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\System32\OpenSSH\;C:\Program Files\UniConvertor-2.0rc4\;C:\Users\andre\AppData\Local\Microsoft\WindowsApps;C:\Program Files (x86)\EaseUS\Todo Backup\bin\x64\
Log: PythonSearchPath = D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\bin\python38.zip;D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\bin\DLLs;D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\bin\lib;D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\bin
Log: RunMode = Gui
Log: SplashAlignment = Bottom|Left
Log: SplashInfoColor = #c8c8c8
Log: SplashScreen = freecadsplash
Log: SplashTextColor = #ffffff
Log: StartWorkbench = StartWorkbench
Log: SystemParameter = C:\Users\andre\AppData\Roaming\FreeCAD\system.cfg
Log: UserAppData = C:\Users\andre\AppData\Roaming\FreeCAD\
Log: UserHomePath = C:\Users\andre\Documents
Log: UserParameter = C:\Users\andre\AppData\Roaming\FreeCAD\user.cfg
Log: Verbose = 
Log: Create Application
Log: Run App init script
Log: Init: starting App::FreeCADInit.py
Log: Init:   Searching for modules...
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\AddonManager... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Arch... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Complete... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Draft... done
Log: Drawing became obsolete in 0.17; consider using TechDraw instead.
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Drawing... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Fem... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Idf... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Image... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Import... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Inspection... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Material... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Measure... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Mesh... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\MeshPart... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\OpenSCAD... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Part... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\PartDesign... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Path... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Points... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Raytracing... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\ReverseEngineering... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Robot... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Show(Init.py not found)... ignore
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Sketcher... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Spreadsheet... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Start... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Surface... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\TechDraw... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Test... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Tux(Init.py not found)... ignore
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Web... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\3D_Printing_Tools(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\A2plus... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\AirPlaneDesign(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ArchTextures... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Assembly4... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BCFPlugin(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIM(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIMBots(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BOLTSFC(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CfdOF... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CurvedShapes... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Curves(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\dodo... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\DynamicData... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ExplodedAssembly(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\fasteners... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\FCGear(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\frame(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\GDML(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Glass(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\lattice2(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Manipulator... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\nurbs(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Plot(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reinforcement(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Render(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reporting... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\sheetmetal... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Silk... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ThreadProfile... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature(Init.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature-macro(Init.py not found)... ignore
Log: Init: Initializing freecad.plot
Log: Init: No init module found in freecad.plot, skipping
Log: Init: Initializing freecad.gdml
Log: Init: No init module found in freecad.gdml, skipping
Log: Init: Initializing freecad.frametools
Log: Init: No init module found in freecad.frametools, skipping
Log: Init: Initializing freecad.gears
Log: Init: No init module found in freecad.gears, skipping
Log: Init: Initializing freecad.asm3
Log: Init: No init module found in freecad.asm3, skipping
Log: Using D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod as module path!
Log: System path after init:
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\bin
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\AddonManager
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Arch
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Complete
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Draft
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Drawing
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Fem
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Idf
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Image
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Import
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Inspection
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Material
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Measure
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Mesh
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\MeshPart
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\OpenSCAD
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Part
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\PartDesign
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Path
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Points
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Raytracing
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\ReverseEngineering
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Robot
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Show
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Sketcher
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Spreadsheet
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Start
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Surface
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\TechDraw
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Test
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Tux
Log:    D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Web
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\3D_Printing_Tools
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\A2plus
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\AirPlaneDesign
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ArchTextures
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Assembly4
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BCFPlugin
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIM
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIMBots
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BOLTSFC
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CfdOF
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CurvedShapes
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Curves
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\dodo
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\DynamicData
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ExplodedAssembly
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\fasteners
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\FCGear
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\frame
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\GDML
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Glass
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\lattice2
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Manipulator
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\nurbs
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Plot
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reinforcement
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Render
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reporting
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\sheetmetal
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Silk
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ThreadProfile
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature
Log:    C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature-macro
Log:    C:\Program Files (x86)\Common Files\Intel\Shared Libraries\redist\ia32_win\mpirt
Log:    C:\Program Files (x86)\Common Files\Intel\Shared Libraries\redist\ia32_win\compiler
Log:    C:\Windows\system32
Log:    C:\Windows
Log:    C:\Windows\System32\Wbem
Log:    C:\Windows\System32\WindowsPowerShell\v1.0\
Log:    C:\Windows\System32\OpenSSH\
Log:    C:\Program Files\UniConvertor-2.0rc4\
Log:    C:\Users\andre\AppData\Local\Microsoft\WindowsApps
Log:    C:\Program Files (x86)\EaseUS\Todo Backup\bin\x64\
Log: Init: App::FreeCADInit.py done
Log: Init: Creating Gui::Application and QApplication
Log: Local server 'FreeCAD' started
Log: OpenGL version is: 4.6 (4.6.0 NVIDIA 441.12)
Log: Run Gui init script
Log: Init: Running FreeCADGuiInit.py start script...
Log: Init:   Searching modules...
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\AddonManager... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Arch... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Complete... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Draft... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Drawing... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Fem... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Idf(InitGui.py not found)... ignore
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Image... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Import... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Inspection... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Material... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Measure(InitGui.py not found)... ignore
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Mesh... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\MeshPart... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\OpenSCAD... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Part... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\PartDesign... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Path... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Points... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Raytracing... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\ReverseEngineering... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Robot... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Show(InitGui.py not found)... ignore
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Sketcher... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Spreadsheet... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Start... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Surface... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\TechDraw... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Test... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Tux... done
Log: Init:      Initializing D:\Download\FreeCAD\Freecad 0-19\FreeCAD_0.19.22284-Win-Conda_vc14.x-x86_64\Mod\Web... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\3D_Printing_Tools... done
Log: Module: Part
Log: Loading Part module... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\A2plus... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\AirPlaneDesign... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ArchTextures... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Assembly4... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BCFPlugin(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIM... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BIMBots(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\BOLTSFC(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CfdOF... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\CurvedShapes... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Curves... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\dodo... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\DynamicData... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ExplodedAssembly... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\fasteners... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\FCGear(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\frame(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\GDML(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Glass... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\lattice2... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Manipulator... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\nurbs... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Plot(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reinforcement(InitGui.py not found)... ignore
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Render... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Reporting... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\sheetmetal... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\Silk... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\ThreadProfile... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature... done
Log: Init:      Initializing C:\Users\andre\AppData\Roaming\FreeCAD\Mod\workfeature-macro(InitGui.py not found)... ignore
Log: Init: Initializing freecad.plot
Log: Init: Initializing freecad.plot... done
Log: Init: Initializing freecad.gdml
Log: Loading GUI of Part module... done
Log: Init: Initializing freecad.gdml... done
Log: Init: Initializing freecad.frametools
Log: Init: Initializing freecad.frametools... done
Log: Init: Initializing freecad.gears
Log: Init: Initializing freecad.gears... done
Log: Init: Initializing freecad.asm3
Log: Init: Initializing freecad.asm3... done
Log: Init: Loading FreeCAD GUI
Err: Traceback (most recent call last):
  File "<string>", line 200, in <module>
<class 'Base.FreeCADError'>: NoneWorkbench: Access violation
Err: Error in FreeCADGuiInit.py: NoneWorkbench: Access violation
Log: Destruct Gui::Application
Questo è il risultato di aver rinominato .old i due files "user" e "system". Mi sembrerebbe identico a prima.
Aspetta,
nella cartella C:\Users\User\AppData\Roaming\FreeCAD prima prova a cancellare o meglio rinomina i file user.cfg e system.cfg in user.old e system.old o qualcosa di simile per poterli eventualmente recuperare, poi prova un nuovo avvio.

I file *.cfg vengono ricreati automaticamente secondo le impostazioni standard, quindi perdi eventuali personalizzazioni, ma si possono recuperare in seguito con i vecchi file di configurazione. Vedi se cambia qualcosa.

Metti il log dentro i tag codice (quinto pulsante di questa finestra in modalità editazione in modo da occupare meno spazio. Clic sul pulsante e poi incolli il testo tra la parentesi chiusa e quella successiva aperta

Code: Select all

[...]qui in mezzo[...]
Da una versione che sia avvia estrai anche le informazioni sul tuo sistema, per vedere quale versione di Coin usi.

AppData non va cancellata, contiene info anche per altre applicazioni, eventualmente si rinomina la cartella FreeCAD in Roaming.
In genere rifare l'installazione non porta benefici, ed è l'ultima cosa da fare. Le versioni dev funzionano in modo autonomo, salvo appunto la configurazione.

Dal tuo log emergono diversi problemi che non sono però molto importanti, ma l'avvio si interrompe quando inizia a caricare la GUI. Puoi anche fare il confronto con il mio log allegato in precedenza.

Code: Select all

Log: Init: Loading FreeCAD GUI
Err: Traceback (most recent call last):
File "<string>", line 200, in <module>
<class 'Base.FreeCADError'>: NoneWorkbench: Access violation
Err: Error in FreeCADGuiInit.py: NoneWorkbench: Access violation
Log: Destruct Gui::Application
Per aiutare gli sviluppatori bisogna fornire più informazioni possibili.
[/quote]
Top
renatorivo
Veteran
Posts: 2611
Joined: Tue Feb 21, 2012 8:07 pm
Location: Torino - Italy

Re: Problema all'avvio di FC

Post by renatorivo »

onekk wrote: ↑Fri Aug 28, 2020 3:27 pm ....alcune cartelle, (mi dicono che siano "nascoste" e a volte non gestibili come "utente normale"..........),
Alcune cartelle dei file di sistema sono nascoste per evitare che vengano modificate accidentalmente.

Nel caso che possa servire, per visualizzarle si deve aprire il Pannello di controllo, poi digitare nel campo di ricerca "File nascosti".
Questo apre la finestra per gestire le opzioni delle cartelle. In Visualizzazione si deve attivare "Visualizza cartelle, file... nascosti".
Top
Ukacor
Posts: 128
Joined: Wed Mar 20, 2019 9:58 am
Location: Marche

Re: Problema all'avvio di FC

Post by Ukacor »

Scusami Renatorivo, come hai fatto Tu ad incollare le info del sistema? Dove le trovo?
Top
Post Reply

Return to “Forum Italiano”