Problem cutting one solid from another

Post here for help on using FreeCAD's graphical user interface (GUI).
chrisb
Posts: 11401
Joined: Tue Mar 17, 2015 9:14 am

Re: Problem cutting one solid from another

Postby chrisb » Fri Sep 14, 2018 1:17 pm

Hi TinyEngineer, welcome. You provide your FreeCAD info, that's good, but you provide neither a link to the video nor your file leaving us guessing what happens.
You must asssure that the height of the sweep section is not too high, so that thread turns don't overlap.