Techdraw wrong views some lines missing

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
ottos888
Posts: 7
Joined: Wed Dec 22, 2021 1:09 pm

Techdraw wrong views some lines missing

Post by ottos888 »

Dear Users! In techdraw workbench the section looks different than it should. Some lines are missing, some I dont know how it came there. And the detailed view does not have the hatch. How can I make it work? And is there a way to set the depth of the section (like I only want to see 100 mm from the section) . Thank you for your repleys.
The file name is the following:" A 02-01 PC asztal oss"
Attachments
Freecad PC asztal csapos.zip
the freecad file.
(249.44 KiB) Downloaded 7 times
snapshot of the problem
snapshot of the problem
2022-01-14 20_27_50-Greenshot.jpg (127.33 KiB) Viewed 174 times
User avatar
wandererfan
Veteran
Posts: 4159
Joined: Tue Nov 06, 2012 5:42 pm

Re: Techdraw wrong views some lines missing

Post by wandererfan »

ottos888 wrote: Fri Jan 14, 2022 7:53 pm Dear Users! In techdraw workbench the section looks different than it should.
https://www.forum.freecadweb.org/viewto ... 13#p559513

As mentioned in my reply to your previous post, A2P assemblies sometimes are not suited to further processing. Both the Section and Detail views require Boolean Operations to be performed on the assembly in order to produce the drawing geometry. If the result is suspect, the drawing will be wrong.

Hatching is performed separately on each View. The Detail view does not know what faces are hatched in the Base view.
Post Reply