I need to seep or loft between 2 objects
but I need the transition rate to be no linear
For exmaple, imagine the image attached was a loft
It transitions between the to faces at a no linear rate
I need to do it with some complex shapes
Sweep/Loft With non linear transition rate
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Sweep/Loft With non linear transition rate
- Attachments
-
- 屏幕截图(2).png (367.97 KiB) Viewed 532 times
- papyblaise
- Veteran
- Posts: 7872
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: Sweep/Loft With non linear transition rate
for this kind of shape it is better to make a trapezium with a curved side and "Revolution"
you can vary l1 , l2 , h , and R
this flow will be suitable for Schml: there are only 4 lines
you can vary l1 , l2 , h , and R
this flow will be suitable for Schml: there are only 4 lines
- Attachments
-
- toupie.JPG (24.99 KiB) Viewed 512 times
-
- toupie.FCStd
- (12.41 KiB) Downloaded 10 times
Re: Sweep/Loft With non linear transition rate
I dont want to do it with circles
it is just an exmaple to explain what i want
I want to do it with 2 complex shapes
it is just an exmaple to explain what i want
I want to do it with 2 complex shapes
Re: Sweep/Loft With non linear transition rate
for example
here is a sweep with a curved path
butin the picture only the left side edge is what i want
i want all the sweep walls to be curves oriented the same respective to the center
a non linear transition rate is the easiest way i think
here is a sweep with a curved path
butin the picture only the left side edge is what i want
i want all the sweep walls to be curves oriented the same respective to the center
a non linear transition rate is the easiest way i think
- Attachments
-
- 屏幕截图(4).png (449.64 KiB) Viewed 476 times
Re: Sweep/Loft With non linear transition rate
You can have intermediate sections controlling the transition from one end to the other.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.