Bevel gear - module/script/tutorial
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Bevel gear - module/script/tutorial
Hello Community,
I've need to build a Bevel gear but I'm not found more information.
Do you know if exist an extension/module and/or py script or tutorial?
If no, could someone can help me to create this bevel gear?
I've already search on google but there is only a video on youtube of chinese and is not clear at all.
Note: my version of freecad is 0.15 - 4671
BR
//Mafer
I've need to build a Bevel gear but I'm not found more information.
Do you know if exist an extension/module and/or py script or tutorial?
If no, could someone can help me to create this bevel gear?
I've already search on google but there is only a video on youtube of chinese and is not clear at all.
Note: my version of freecad is 0.15 - 4671
BR
//Mafer
Re: Bevel gear - module/script/tutorial
Use the part design involute gear tool to specify the gear's base profile parameters, scale a coaxial clone that isn't on the same workplane in x and y, with a and use them as profiles to loft between.
Re: Bevel gear - module/script/tutorial
thanks for feedback, could you help me with more details? I'm a newbe
//mafer
//mafer
-
- Posts: 110
- Joined: Fri Jul 17, 2015 7:40 pm
Re: Bevel gear - module/script/tutorial
I am new to FreeCAD too. I tried the loft tool, the result gear is twisted. You may try the gear workbench,
viewtopic.php?f=3&t=12771&p=102283&hili ... ar#p102283
viewtopic.php?f=3&t=12771&p=102283&hili ... ar#p102283
Re: Bevel gear - module/script/tutorial
Shouldn't come out twisted unless you instructed FreeCAD to do so / didn't perform the task correctly.godblessfq wrote:I am new to FreeCAD too. I tried the loft tool, the result gear is twisted. You may try the gear workbench,
viewtopic.php?f=3&t=12771&p=102283&hili ... ar#p102283
Mark
OS: Kubuntu 14.04.3 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.5764 (Git)
Build type: Release
Branch: master
Hash: eff27994e57bc1eb07af8f378d1b85e3b635e194
Python version: 2.7.6
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17-dev
This post made with 0.0% Micro$oft products - GOT LINUX?
Re: Bevel gear - module/script/tutorial
Hello guys,
first of all many thanks for your answers.
If I understand well I've two options at now:
1 use the gear workbench retrieved on the following URL https://github.com/looooo/FCGear
for this one , do you know if this workbench works fine als oon the version 0.15 4671?
2 modify the fcstd posted by quick61
well done
//Mafer
first of all many thanks for your answers.
If I understand well I've two options at now:
1 use the gear workbench retrieved on the following URL https://github.com/looooo/FCGear
for this one , do you know if this workbench works fine als oon the version 0.15 4671?
2 modify the fcstd posted by quick61
well done
//Mafer
Re: Bevel gear - module/script/tutorial
Works fine for memafer78 wrote:1 use the gear workbench retrieved on the following URL https://github.com/looooo/FCGear
for this one , do you know if this workbench works fine also on the version 0.15 4671?
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.15.4671 (Git)
Branch: releases/FreeCAD-0-15
Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c
Python version: 2.7.8
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
"fight the good fight"
Re: Bevel gear - module/script/tutorial
You don't have to modify what I did, just create the gear size you wish to have at the base, then Draft Clone it. With the Clone, any changes you make to the original, like number of teeth, module size, pressure angle will be automatically updated in the Clone. Once you have the Clone, you can scale it through the Scale entries its data tab and position it's height with Placement. Then Part Loft between the two. It's that easy.mafer78 wrote:Hello guys,
first of all many thanks for your answers.
If I understand well I've two options at now:
1 use the gear workbench retrieved on the following URL https://github.com/looooo/FCGear
for this one , do you know if this workbench works fine als oon the version 0.15 4671?
2 modify the fcstd posted by quick61
well done
//Mafer
Give it a try.
Mark
This post made with 0.0% Micro$oft products - GOT LINUX?
- DeepSOIC
- Veteran
- Posts: 7896
- Joined: Fri Aug 29, 2014 12:45 am
- Location: used to be Saint-Petersburg, Russia
Re: Bevel gear - module/script/tutorial
I suspect that Marks method doesn't produce correct tooth profile. But it is probably good enough for FFF 3d printing.
Re: Bevel gear - module/script/tutorial
Hi,
great feedback but I coming back to you
sgrogan : I've tried to install but any appear on the workbench window (?!!!) , I've followed the istraction on the github.
quick61: great method , I've tried with good result but I've need bit more.....
In attachment a image of bevel gears that I need to buildup on freecad, with the red arrows some aspects that I don't understand what I can do for reproducing the line. Could you help me?
every other tip&trick are really welcome
br
//Mafer
great feedback but I coming back to you
sgrogan : I've tried to install but any appear on the workbench window (?!!!) , I've followed the istraction on the github.
quick61: great method , I've tried with good result but I've need bit more.....
In attachment a image of bevel gears that I need to buildup on freecad, with the red arrows some aspects that I don't understand what I can do for reproducing the line. Could you help me?
every other tip&trick are really welcome
br
//Mafer
- Attachments
-
- bevel_gear.JPG (25.72 KiB) Viewed 9209 times