Hi to all,
I searched the forum for keywords clone + placement, but didn't find a related topic.
When I wanted to switch the placements from a part and its clone, the clone doesn't accept placement of the part. Part is a thickness of a cube and has placement 0,0,0 the cube has a placement somewhere else.
I investigated a little bit in an empty document:
- Make a cylinder with part WB, standard-values will do
- Give it placement e.g. 10 mm in x
- Make a clone with draft WB
- Try to give the clone placement 0, 0, 0, click OK and it jumps back to 10, 0, 0. Any other placement will do.
Same with move-tool from draft WB.
I'm using development snapshot, but the same behaviour in 0.15 release.
OS: Windows 8.1
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6472 (Git)
Build type: Release
Branch: master
Hash: a1f16cabec56425f741b12f1d9d2f9e1d0ec61bf
Python version: 2.7.8
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
[solved] Clone doesn't accept placement 0, 0, 0
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
- Boneshaker
- Posts: 69
- Joined: Sat Feb 20, 2016 2:20 pm
- Location: Emden, Germany
[solved] Clone doesn't accept placement 0, 0, 0
Last edited by Boneshaker on Sat Feb 27, 2016 8:16 pm, edited 1 time in total.
Monthly FreeCAD Challenge: https://forum.freecadweb.org/viewtopic.php?f=24&t=36615
Re: Clone doesn't accept placement 0, 0, 0
Same problem here but it seems any Placement other than at the origin works.
OS: Ubuntu 14.04.4 LTS
Word size of OS: 32-bit
Word size of FreeCAD: 32-bit
Version: 0.16.6456 (Git)
Build type: None
Branch: master
Hash: 9e551e0fdb4321de57471d18a17449e4df0015a6
Python version: 2.7.6
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
OS: Ubuntu 14.04.4 LTS
Word size of OS: 32-bit
Word size of FreeCAD: 32-bit
Version: 0.16.6456 (Git)
Build type: None
Branch: master
Hash: 9e551e0fdb4321de57471d18a17449e4df0015a6
Python version: 2.7.6
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
- Boneshaker
- Posts: 69
- Joined: Sat Feb 20, 2016 2:20 pm
- Location: Emden, Germany
Re: Clone doesn't accept placement 0, 0, 0
Thanks for confirming on Linux.
Knowing of it, it's no big problem. It was strange the clone didn't want to move as I thought.
Maybe it's a bug.
Knowing of it, it's no big problem. It was strange the clone didn't want to move as I thought.
Maybe it's a bug.
Monthly FreeCAD Challenge: https://forum.freecadweb.org/viewtopic.php?f=24&t=36615
Re: Clone doesn't accept placement 0, 0, 0
You're welcome. I don't think it's a big deal but I can't think of a reason why a Clone shouldn't be at 0,0,0. Nonetheless I cross posted here:
viewtopic.php?f=8&t=11557&p=115651#p115651
viewtopic.php?f=8&t=11557&p=115651#p115651
- Boneshaker
- Posts: 69
- Joined: Sat Feb 20, 2016 2:20 pm
- Location: Emden, Germany
Re: Clone doesn't accept placement 0, 0, 0
Thanks very much.
Monthly FreeCAD Challenge: https://forum.freecadweb.org/viewtopic.php?f=24&t=36615