Curves workbench
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Curves workbench
Thanks Glouglou.
Pipeshell should be fixed now.
Pipeshell should be fixed now.
Re: Curves workbench
Always add the important information to your posts if you need help. Also see Tutorials and Video tutorials.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
Re: Curves workbench
draft WB features doesn't be linked with parent shape.
Re: Curves workbench
Suggested improvement:
SplitCurve on an unique a point with a mm dimension, that's could be parametrize able.
SplitCurve on an unique a point with a mm dimension, that's could be parametrize able.
- Attachments
-
- Capture.JPG (32.41 KiB) Viewed 1589 times
Re: Curves workbench
... or grant a display on DataTab, where the the original length of the curve (to be splitted) is given.
Then one can calculate it "exactly" in %.
Then one can calculate it "exactly" in %.
Re: Curves workbench
It is already possible to enter mm values, from curve start (positive values) or from the curve end (negative values) :
Re: Curves workbench
... got it!
I always was seeking for an alternative way to display a fiber winding pattern on a pressure sphere (aerospace).
Split_Curve and Interpolation_Curve are another solution.
(Interpolation_Curve is not exact, compared to great circle construction with Blend_Curve)
I always was seeking for an alternative way to display a fiber winding pattern on a pressure sphere (aerospace).
Split_Curve and Interpolation_Curve are another solution.
(Interpolation_Curve is not exact, compared to great circle construction with Blend_Curve)
- Attachments
-
- FiberWindingSphere_3.FCStd
- (34.05 KiB) Downloaded 42 times
-
- FiberWindingSphere.FCStd
- FC.18.4
- (28.96 KiB) Downloaded 63 times
Re: Curves workbench
I have added 2 new properties to SplitCurve :
- Distance : is a single-value field that is expression-ready
- Cutting Objects : will cut the curve at its nearest point
Re: Curves workbench
... I found another useful application for Split_Curve.
Up to now I couldn't design a clinker built boat => the planking already Wikings used.
Discretized_Edge only delivers equally spaced frame points.
With Split_Curve it is possible to produce parametric and controllable distances for more than one point.
The produced clinker planking example isn't perfect and needs still more work.
But the idea and the feature rises some hope.
( when using Interpolation_Curve better check "Detect Alignment" to false )
Up to now I couldn't design a clinker built boat => the planking already Wikings used.
Discretized_Edge only delivers equally spaced frame points.
With Split_Curve it is possible to produce parametric and controllable distances for more than one point.
The produced clinker planking example isn't perfect and needs still more work.
But the idea and the feature rises some hope.
( when using Interpolation_Curve better check "Detect Alignment" to false )
- Attachments
-
- Dinghi_2.FCStd
- FC.18.4
- (388.83 KiB) Downloaded 61 times
Re: Curves workbench
Very nice Chris!
Curve Wb is becoming perfect!
Curve Wb is becoming perfect!