Curves workbench
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Curves workbench
Perfect like this
- Attachments
-
- Surface2Make3.FCStd
- (626.14 KiB) Downloaded 61 times
-
- Capture.JPG (76.93 KiB) Viewed 2008 times
Re: Curves workbench
Could someone give me a step by step on using snapping in create freehand bspline tool?
It is eluding me.
I'm attempting to snap the mid vertex of a new bspline on a profile (the profile happens to be in a sketch).
I get the bspline point moving at a distance to the cursor, and the report view keep repeating "snapping to none".
Edit: Got it! select the vertex of the spline, and ctrl-click the target vertex (or edge) and THEN hit s. Duh.
It is eluding me.
I'm attempting to snap the mid vertex of a new bspline on a profile (the profile happens to be in a sketch).
I get the bspline point moving at a distance to the cursor, and the report view keep repeating "snapping to none".
Edit: Got it! select the vertex of the spline, and ctrl-click the target vertex (or edge) and THEN hit s. Duh.
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Curves workbench
Sooo...when I open this file the following is displayed:
And, before or after deleting the broken Gordon surface I can't select the line circles in red:
Code: Select all
Traceback (most recent call last):
File "/home/mac/.FreeCAD/Mod/Curves/freecad/Curves/Discretize.py", line 219, in __setstate__
self.obj = FreeCAD.ActiveDocument.getObject(state["name"])
<class 'KeyError'>: ('name',)
08:52:14 Traceback (most recent call last):
File "/home/mac/.FreeCAD/Mod/Curves/freecad/Curves/Discretize.py", line 219, in __setstate__
self.obj = FreeCAD.ActiveDocument.getObject(state["name"])
<class 'KeyError'>: ('name',)
08:52:14 SketchObject::onChanged(): Unmanaged change of Constraint Property results in invalid constraint indices
- Attachments
-
- In and out garbage_OOTB-1.FCStd
- (27.62 KiB) Downloaded 51 times
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Curves workbench
Did you update the workbench recently ? This should not appear with current version.drmacro wrote: ↑Mon Jun 07, 2021 1:00 pm Sooo...when I open this file the following is displayed:
Code: Select all
Traceback (most recent call last): File "/home/mac/.FreeCAD/Mod/Curves/freecad/Curves/Discretize.py", line 219, in __setstate__ self.obj = FreeCAD.ActiveDocument.getObject(state["name"]) <class 'KeyError'>: ('name',) ...
In the View Properties, "Selectable" is set to False for this curve.
Re: Curves workbench
Addon Mangler says it's up to date (Note: this on local built 0.20 master...if that makes a difference.)
Ok...but, I created this spline. I didn't set it that way....
In the View Properties, "Selectable" is set to False for this curve.
Is it possible that it got toggled some how when I was attempting figure out how to use the 's' snap keyboard shortcut?
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Curves workbench
What does this mean? (Same file after some addition splines, but no change to the discretized lines.)
Code: Select all
PropertyPythonObject::toString(): failed for <class 'freecad.Curves.Discretize.Discretization'>
11:54:16 Traceback (most recent call last):
File "/home/mac/.FreeCAD/Mod/Curves/freecad/Curves/Discretize.py", line 213, in __getstate__
out = {"name": self.obj.Name,
<class 'AttributeError'>: 'Discretization' object has no attribute 'obj'
11:54:16 PropertyPythonObject::toString(): failed for <class 'freecad.Curves.Discretize.Discretization'>
11:54:16 Traceback (most recent call last):
File "/home/mac/.FreeCAD/Mod/Curves/freecad/Curves/Discretize.py", line 213, in __getstate__
out = {"name": self.obj.Name,
<class 'AttributeError'>: 'Discretization' object has no attribute 'obj'
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Curves workbench
The Selectable property is toggled when entering / leaving edit mode.
So I suppose it may stay to False, if edit mode is not (or improperly) exited.
It definitely means that the workbench is not up-to-date.
Maybe you can uninstall / re-install ?
Re: Curves workbench
Thanks!
Looks like uninstall/re-install fixed it.
Looks like uninstall/re-install fixed it.
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Curves workbench
I am sorry for the slight off-topic. But I've spent a few hours, scratching my head how you got that smooth surface. If I delete your surface.filling and make my own, I can't get it to be continuos, even with the non-boundary edge added.
I noticed that the surfaces you made had different Boundary Faces and Boundary Order.
Yours Mine
But I don't seem to be able to edit those (I get a hard crash)
Please help?
Re: Curves workbench
In the Surface.Filling UI, in the list of boundary edges, you can double-click an edge to choose its attached face and G1 continuity.