Hi,
I'm using 0.17 / Qt5 version (detail below) on MacOs Yosemite / MacBook Pro.
After lots of experimenting and googling I still have not solved some very basic issues:
I create (sketch ) a rectangle, I pad (extrude) it to create a box. I then click one of the faces of the box and click sketch 'create new sketch'. On that sketch I create, for example, a circle.
But how do I constrain/dimension that relative to the box/rectangle edge?
Also where I can set the 'points' (corners, vertexes) to a larger size.
wbr Kusti
OS: Mac OS X
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.12502 (Git)
Build type: Release
Branch: master
Hash: d2f4fcb6a2deec4aa4c0ba1501bf07df8aacd86e
Python version: 2.7.14
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.1.0
Locale: English/UnitedKingdom (en_GB)
Dimension/constrain on-face sketch sketches relative to the edge of the face
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Dimension/constrain on-face sketch sketches relative to the edge of the face
Hi kusti
In the toolbar you have 2 useful tools, the first is used to transform 1 edge into construction lines, the 2nd is used to draw 1 construction line (in blue on the sketch)
In the toolbar you have 2 useful tools, the first is used to transform 1 edge into construction lines, the 2nd is used to draw 1 construction line (in blue on the sketch)
- Attachments
-
- constrution.JPG (18.57 KiB) Viewed 981 times
Re: Dimension/constrain on-face sketch sketches relative to the edge of the face
Thanks! That worked for me.