Drawing 100 tooth HTD 3M timing pulley
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 243
- Joined: Wed May 31, 2017 11:49 pm
Re: Drawing 100 tooth HTD 3M timing pulley
I deleted constraints #25 & #26. Okay now...
MAC OSX Sierra
3D Parts & Links (made using FreeCad and Solidworks): https://www.thingiverse.com/Still_Breathing/designs
Android App & Links: https://play.google.com/store/apps/deta ... .bestknots
3D Parts & Links (made using FreeCad and Solidworks): https://www.thingiverse.com/Still_Breathing/designs
Android App & Links: https://play.google.com/store/apps/deta ... .bestknots
Re: Drawing 100 tooth HTD 3M timing pulley
This is a tutorial that I prepared for a 5 mm pitch HTD sprocket but with some substitution it will generate the tooth profile for a 300 pitch sprocket. All of my engineer came from Gates Rubber with the exception of the belt tooth width and end radius. Gates doesn't publish that information nor will they provide it for and individual. In my case the belt tooth measured .110 or 2.8 mm and that corresponded with the dimension that I found on a competitor's site. You need that dimension for the red circle used in generating an involute curve. The point spacing is (( teeth * 3mm) / 360) and they aoo rotate together 1º with 30 copies. Trim the bottom segment of the curve to Y axis and then mirror the tooth Geometry on Y axis and the rotate the Geometry 3.6º with 99 copies.
Replace 5 mm with 3 mm
Replace 30 with 100
Replace .045 with .030" - see picture
Replace .0818898 with .048
Replace 5 mm with 3 mm
Replace 30 with 100
Replace .045 with .030" - see picture
Replace .0818898 with .048
Last edited by Kunda1 on Thu Mar 18, 2021 11:35 am, edited 1 time in total.
Reason: added direct link to external image
Reason: added direct link to external image