how to do a screw

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
jio80
Posts: 22
Joined: Mon Sep 03, 2018 9:52 pm

how to do a screw

Postby jio80 » Wed Sep 12, 2018 8:53 pm

Hi!

Sorry again.
I have a problem for to do my screw on the new version freecad.
I have freecad 0.17
It's for to do the screw thread.

Could you help me ? Pease .

thanks

see ya
User avatar
Mongrel_Shark
Posts: 129
Joined: Sat Oct 15, 2016 9:54 am
Location: Australia

Re: how to do a screw

Postby Mongrel_Shark » Wed Sep 12, 2018 10:11 pm

Going to need more info please.

How did you do a screw thread before?
FC0.17 does threads much better now, but there are some changes in the process.

Very quick explanation:
You need to make a helix in Part WB then in Part Design WB make a shape binder from the helix, then attach datum plane to shape binder, add thread profile sketch to datum plane then do additive or subtarctive pipe as required. There is a forum thread with more detailed instruction somewhere. Perhaps someone else knows where it is?

You can do a split washer that way too, in answer to your other thread.
jio80
Posts: 22
Joined: Mon Sep 03, 2018 9:52 pm

Re: how to do a screw

Postby jio80 » Thu Sep 13, 2018 10:09 am

Thanks for the explanation .
That is just, on the new version, he must to do compound after the chamfer. After doing what you said.
Thanks again