Hi I'm a first time user of FreeCAD or any CAD program for that matter.
Been following tutorials on Youtube copying the drawing of the Whiffle Ball, sounds silly but i'm not getting same results, everything works till i try to change orientation of the triangles to cut away the corners....
First Time user
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
HarryGeier
- Veteran
- Posts: 1231
- Joined: Mon Jul 10, 2017 12:36 pm
- Location: Hof Germany
Re: First Time user
Hi, welcome on the Forum,
the Problem is , the Whiffle Ball Tutorial is for an outdated Version.
Please ONLY look at tutorials for 0.17 or 0.18 if it´s about PART DESIGN WORKBENCH
There is a BIG difference in that Workbench between <0,17 and >0.16 Versions
the Problem is , the Whiffle Ball Tutorial is for an outdated Version.
Please ONLY look at tutorials for 0.17 or 0.18 if it´s about PART DESIGN WORKBENCH
There is a BIG difference in that Workbench between <0,17 and >0.16 Versions
Kaum macht man´s richtig , gehts´s
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
Re: First Time user
CfSmith, I wrote this when I started, might help some.
https://forum.freecadweb.org/viewtopic.php?f=21&t=29179
https://forum.freecadweb.org/viewtopic.php?f=21&t=29179