0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
You don't have to do all the testing yourself. As soon as you are confident enough, roll it out and wait for the feedback. From the echo here, there are enough testers around.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
I don't see the movement either...
I don't think it's unreasonable for an unconstrained endpoint to move a tiny bit after the Fillet is applied, and I'm pretty sure that behavior existed before. I think your changes should be merged, and we can report back to you regarding any issues we might find.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Ok. I see you all are eager. I am going to do some tests and will ask Werner about when to merge.bejant wrote: ↑Sun Oct 21, 2018 2:44 pm I don't think it's unreasonable for an unconstrained endpoint to move a tiny bit after the Fillet is applied, and I'm pretty sure that behavior existed before. I think your changes should be merged, and we can report back to you regarding any issues we might find.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
You shouldn't take the moving too serious, things move all the time in sketcher as long as the sketch is not fully constraint. I see that it would be nice not to move in this case, but there is no need for it.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
I am no longer considering moving as an issue. B-Splines will move, but I think this is normal.
I am trying to clean up the code and make some meaningful messages for the user, as:
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
@abdullah is there a way to tell Qt to create a popup that doesn't cease operations till you press 'OK' ?
Instead it either stays open and less conspicuous (to the side) or even dissolves after a certain time threshold is reached ?
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Not to my knowledge.
Another task for the idea of the "clipper"-alike assistant.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
@abdullah Did you ever hear/see the tragic story of what happened to Clippy?
https://i.gifer.com/Axob.gif (it's an animated gif and I wanted to save data for mobile users)
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Poor thing...Kunda1 wrote: ↑Fri Oct 26, 2018 3:39 pm@abdullah Did you ever hear/see the tragic story of what happened to Clippy?
https://i.gifer.com/Axob.gif (it's an animated gif and I wanted to save data for mobile users)
It seems you trying to make a fillet...
we could always task "Rocky" with it.