0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Werner has merged it.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Wait for the next build to test.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Will test when it is available in daily.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Welcome! It was in the bug tracker for a while.
BTW, it did not get into the PPA by some hours...
There is another PR for the trimming issues:
https://github.com/FreeCAD/FreeCAD/pull/1759
When that gets merged, I would appreciate some attention to Fillets and Trimming testing.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Thanks Abdullah and Werner!
I've briefly tested it in the latest daily that was rolled out on the PPA a few hours ago. I'm surprised it worked between a B-spline and a line! Cool!
There is one condition where it fails, and that is between a line and an arc perpendicular to it.
The line and arc were made with the polyline tool.
OS: Ubuntu 18.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15099 (Git)
Build type: Release
Branch: master
Hash: 1538a14eca0879be3d223930f7e5f78d4a24691c
Python version: 2.7.15rc1
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: French/Canada (fr_CA)
I've briefly tested it in the latest daily that was rolled out on the PPA a few hours ago. I'm surprised it worked between a B-spline and a line! Cool!
There is one condition where it fails, and that is between a line and an arc perpendicular to it.
The line and arc were made with the polyline tool.
OS: Ubuntu 18.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15099 (Git)
Build type: Release
Branch: master
Hash: 1538a14eca0879be3d223930f7e5f78d4a24691c
Python version: 2.7.15rc1
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: French/Canada (fr_CA)
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Observations:
- test of pathological tangent circlesarcs -> Error message in report view
- test of pathological tangent circlearc/line -> Error message in report view
- Arc and line towards the inside works if arc is selected first, although the points selected are not the endpoints of the fillet
- Arc and line towards the inside does not work, if line is selected first.
- Arc and line toward the outside works as expected.
Edits in blue.
- test of pathological tangent circlesarcs -> Error message in report view
- test of pathological tangent circlearc/line -> Error message in report view
- Arc and line towards the inside works if arc is selected first, although the points selected are not the endpoints of the fillet
- Arc and line towards the inside does not work, if line is selected first.
- Arc and line toward the outside works as expected.
Edits in blue.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
If an arc and a line are not connected, then filleting works only if the line points outward and not inward of the circle.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: 0001304: Allow Sketcher to Fillet Arcs, Not Only Lines
Perhaps it was the wrong word. We use "pathological" to describe a situation with no practical usage beyond showing some fault, perhaps "silly" would have been better. In addition I said "circle" where it should read "arc". I have to confess, this time it cannot be excused with just a few typos.
I meant something like this ... ...where it is not really sensible to add fillets. Well, at the left an arc could be inserted with a radius between those of the adjacent arcs, but at the right a "fillet" would have to be a straight line? So I just called these "pathological".
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.