(Solved) 0.18 two issues (treeview and zooming peformance)

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Posts: 344
Joined: Mon Jul 11, 2016 5:08 pm

Re: (Solved) 0.18 two issues (treeview and zooming peformance)

Postby user1234 » Mon Nov 19, 2018 8:00 pm

DeepSOIC wrote:
Mon Nov 19, 2018 7:40 pm
It looks like you have very high tessellation accuracy (i.e. low deviation).
Have known this before. And no, i have set it to 1% per default (and is also setted in the bodies), because this was so slow. But this was not the problem. The caluclation of the mouse was the problem. Now this is fast as furios.

Thanks a lot!

Posts: 1732
Joined: Thu Mar 22, 2018 3:02 am
Location: Washington State, USA

Re: (Solved) 0.18 two issues (treeview and zooming peformance)

Postby freedman » Tue Nov 20, 2018 3:14 am

Maybe a few words about preferences->Sketcher->Segments per geometry. I remember I had to increase this to over 100 once to get two circles to constrain correctly, one circle seemed crude. I would imagine this setting could slow things down with a large value.
Posts: 9475
Joined: Mon Dec 12, 2011 4:45 pm

Re: (Solved) 0.18 two issues (treeview and zooming peformance)

Postby triplus » Wed Sep 04, 2019 10:54 am

I guess Tree (and property) view got disabled again, by default?

https://forum.freecadweb.org/viewtopic. ... 40#p331707