As I posted before, the Altium file seems to have a pcb Edge done twice (two lines each edge/border) ... then the result is a wrong shape when exported to idf...
I didn't noticed either errors on IDF importing coming from other pcb files....
As I posted before, the Altium file seems to have a pcb Edge done twice (two lines each edge/border) ... then the result is a wrong shape when exported to idf...
Unfortunately I didn't have Altium to check. Maybe that is the reason.
Do you mean files coming from Altium or from other ECAD ?I didn't noticed either errors on IDF importing coming from other pcb files....
1) I converted the Altium to kicad using the online converter and I did found that issue... but this could come from the conversion (i.e. from keepout area)openBrain wrote: ↑Fri Dec 07, 2018 8:57 pmUnfortunately I didn't have Altium to check. Maybe that is the reason.
On IDF file, board outlines are superimposed with thin areas of route keepout, via keepout & place keepout. It could also be the extra lines you see.Do you mean files coming from Altium or from other ECAD ?I didn't noticed either errors on IDF importing coming from other pcb files....
Will appreciate if you keep us updated.