Corner Cut Out
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
- DeepSOIC
- Veteran
- Posts: 7896
- Joined: Fri Aug 29, 2014 12:45 am
- Location: used to be Saint-Petersburg, Russia
Re: Corner Cut Out
Another way, with Part workbench.
0. Add Cube
1. add Sphere
2. attach sphere to a vertex of cube you want to cut (attachment can be accessed by clicking '...' button next to MapMode property of Sphere, or from menu Part->Attachment)
3. Part Section between Cube and Sphere.
4. Attach a sketch to the three vertices of the section wire.
5. Draw something big enough in the sketch.
6. Part Extrude the sketch
7. Part Cut Cube with Extrude.
0. Add Cube
1. add Sphere
2. attach sphere to a vertex of cube you want to cut (attachment can be accessed by clicking '...' button next to MapMode property of Sphere, or from menu Part->Attachment)
3. Part Section between Cube and Sphere.
4. Attach a sketch to the three vertices of the section wire.
5. Draw something big enough in the sketch.
6. Part Extrude the sketch
7. Part Cut Cube with Extrude.
- Attachments
-
- cut off a corner - Part.FCStd
- (11.64 KiB) Downloaded 22 times
Re: Corner Cut Out
Thanks for this very good to get the equal distances from the vertex.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Corner Cut Out
Race is on?
Here another way using PartWB.
- make a cube and chamfer it (selecting 3 edges at once)
- remove unwanted chamfers using PartWB:Defeaturing (selecting 3 unwanted faces at once)
That's for the lazy ones
Who knows the maths
Here another way using PartWB.
- make a cube and chamfer it (selecting 3 edges at once)
- remove unwanted chamfers using PartWB:Defeaturing (selecting 3 unwanted faces at once)
That's for the lazy ones
Who knows the maths
Re: Corner Cut Out
… funny tasks to do brain and CAD sports, I like them
- Attachments
-
- CubeFacet.FCStd
- FC.18.15456
- (13.75 KiB) Downloaded 29 times
Re: Corner Cut Out
To do it in PartDesign this way we need a DatumSphere .
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Corner Cut Out
How do you invoque this "PartWB:Defeaturing" tool ?UR_ wrote: - ..
- remove unwanted chamfers using PartWB:Defeaturing (selecting 3 unwanted faces at once)
--
Marc BERLIOUX
Marc BERLIOUX
Re: Corner Cut Out
You need a current 0.18 with OCC 7.3 or up. Select a face and call in Part WB: Menu->Part->Defeaturing
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Corner Cut Out
Hey, lazy means you can do something else with the time you saved! You don't need to admit that you'll be goofing off!
Pity though that Defeaturing is not parametric.
Re: Corner Cut Out
I didn't think about that, but it's almost "natural" because it relies on a selection of faces.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Corner Cut Out
To be sure, when working on imported solids, it does not make sense for the defeaturing tool to be parametric. Still, it could be useful sometimes. Kind of like Part Refine shape VS. OpenSCAD Refine shape feature, or the Refine property for PartDesign features and Part Booleans.