Use any Model or: Make 3 pads all stacked one on each other, so now we have pad-zero,pad001,pad002 and sketch-zero,sketch001,sketch002. Normally at this point pad002 is selected showing the entire model, now open sketch-zero and close it, then open sketch001 and close it, the model disappears. That doesn't seem right.
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15780 (Git)
Build type: Release
Branch: master
Hash: f94e76c1116ec3b818961ff65131b3d86fa5b95e
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: English/UnitedStates (en_US)
Model disappears (solved) config file problem
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Model disappears (solved) config file problem
Last edited by freedman on Mon Feb 11, 2019 7:14 am, edited 1 time in total.
Re: Model disappears
I can't reproduce that, after closing any Sketch FreeCAD recalculates and the 3D view reverts to as it existed before the Sketches were edited, but showing the changed geometry...freedman wrote: ↑Sun Feb 10, 2019 5:59 pm Make 3 pads all stacked one on each other, so now we have pad-zero,pad001,pad002 and sketch-zero,sketch001,sketch002. Normally at this point pad002 is selected showing the entire model, now open sketch-zero and close it, then open sketch001 and close it, the model disappears.
OS: Ubuntu 18.04.1 LTS
Word size of OS: 32-bit
Word size of FreeCAD: 32-bit
Version: 0.18.15780 (Git)
Build type: Release
Branch: master
Hash: f94e76c1116ec3b818961ff65131b3d86fa5b95e
Python version: 2.7.15rc1
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
Re: Model disappears
Your model does not disappear. Here is one I generated and it fails. I selected faces and sketched on them.
- Attachments
-
- disappear1.FCStd
- (23.8 KiB) Downloaded 61 times
Re: Model disappears
I can reproduce this in your file. Also, Sketch001 and Sketch002 cannot be properly edited. Weird.
However, if I recreate both sketches and the pads, the behavior returns to normal.
OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15780 (Git)
Build type: Release
Branch: master
Hash: f94e76c1116ec3b818961ff65131b3d86fa5b95e
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: English/UnitedStates (en_US)
"It is a poor workman who blames his tools..."
Re: Model disappears
Don't have time now, I will reset my config file and try again. That has to be next.
Re: Model disappears (Solved ) reload config files
It was the config files.
Thanks
Thanks