chamfer (bevel) cylinder to make hypodermic needle

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
Corapuna
Posts: 2
Joined: Sat Mar 23, 2019 9:26 am

chamfer (bevel) cylinder to make hypodermic needle

Post by Corapuna »

Dear all

I have fiddled around with trying to create this from 2 cylinders (I can make the basic needle). However I can't see how to bevel the end.

Advice much appreciated

Jon

Hypodermic_needle_with_needle_cap_2.jpg
Hypodermic_needle_with_needle_cap_2.jpg (71.49 KiB) Viewed 602 times
Top
User avatar
meme2704
Veteran
Posts: 2926
Joined: Sat Apr 01, 2017 2:47 pm
Location: Vosges

Re: chamfer (bevel) cylinder to make hypodermic needle

Post by meme2704 »

Hi
In the occurance here, it is not a chamfer but an angular cut
you make a tanganciel angle and you do a booleen subtraction
Attachments
needle.PNG
needle.PNG (15.66 KiB) Viewed 594 times
Top
Corapuna
Posts: 2
Joined: Sat Mar 23, 2019 9:26 am

Re: chamfer (bevel) cylinder to make hypodermic needle

Post by Corapuna »

Thanks - so obvious as you demonstrate. Saved me loads of time!
Top
kisolre
Veteran
Posts: 4166
Joined: Wed Nov 21, 2018 1:13 pm

Re: chamfer (bevel) cylinder to make hypodermic needle

Post by kisolre »

HypodermicNeedle.JPG
HypodermicNeedle.JPG (50.92 KiB) Viewed 567 times
Attachments
NypodermicNeedle.FCStd
(30.82 KiB) Downloaded 20 times
Top
User avatar
meme2704
Veteran
Posts: 2926
Joined: Sat Apr 01, 2017 2:47 pm
Location: Vosges

Re: chamfer (bevel) cylinder to make hypodermic needle

Post by meme2704 »

To know that he is sharpened in 3 angles, I am not sure of being braver at the next visit of the nurse :lol:
Top
kisolre
Veteran
Posts: 4166
Joined: Wed Nov 21, 2018 1:13 pm

Re: chamfer (bevel) cylinder to make hypodermic needle

Post by kisolre »

Image
Image
Top
Post Reply

Return to “Help on using FreeCAD”