Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
-
mario52
- Veteran
- Posts: 4692
- Joined: Wed May 16, 2012 2:13 pm
Post
by mario52 »
hi
freedman wrote: ↑Mon Mar 25, 2019 6:46 pm
Are you using the export: Autodesk DXF 2D for a file type?
yes but some face are not just (curves)
the select face as meme2704 work well without create projection and the result is same my example
mario
-
aduarte
- Posts: 5
- Joined: Sun Apr 24, 2022 8:40 am
Post
by aduarte »
Hello,
I'm having a similar issue on v0.19, on Win 10 x64.
I opened an STP file and rotate the object to obtain the desired viewpoint.
I selected Export and activated the "... along viewing direction" option.
The resulting DWG is always exported using the "Top View", and not the current view.
Any ideas ?
-
aduarte
- Posts: 5
- Joined: Sun Apr 24, 2022 8:40 am
Post
by aduarte »
Hello,
I have installed v0.20 and tried exporting, but I am getting empty dwg output.
I am attaching the file I am trying to export. Just selected isometric view and then File - Export - DWG format
I have ODAFileConverter 23.3.0 installed.
-
Attachments
-
- RGBEx4.7z
- (143.24 KiB) Downloaded 13 times
-
Roy_043
- Veteran
- Posts: 8552
- Joined: Thu Dec 27, 2018 12:28 pm
Post
by Roy_043 »
aduarte wrote: ↑Sun Apr 24, 2022 8:55 am
the "... along viewing direction" option.
For this option you need to use the legacy exporter.
-
thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
-
Contact:
Post
by thomas-neemann »
aduarte wrote: ↑Tue May 03, 2022 8:14 am
...
here is a suggestion, video follows
- Bildschirmfoto_2022-05-03_10-50-46.png (83.63 KiB) Viewed 654 times
-
aduarte
- Posts: 5
- Joined: Sun Apr 24, 2022 8:40 am
Post
by aduarte »
Thanks,
But you are exporting to 3D DWG.
What I need is to export a flattened 3D view from a specific viewing direction to 2D DWG.
This is an odd bug, because it used to work perfectly on v0.17.
-
aduarte
- Posts: 5
- Joined: Sun Apr 24, 2022 8:40 am
Post
by aduarte »
Roy_043 wrote: ↑Tue May 03, 2022 8:41 am
aduarte wrote: ↑Sun Apr 24, 2022 8:55 am
the "... along viewing direction" option.
For this option you need to use the legacy exporter.
I have tried the legacy exporter, using the options attached.
The resulting DWG file is empty.
-
Attachments
-
- 2022-05-03_10h02_52.png (80.27 KiB) Viewed 637 times
-
Roy_043
- Veteran
- Posts: 8552
- Joined: Thu Dec 27, 2018 12:28 pm
Post
by Roy_043 »
- Delete the Std_Part (but do not delete its content).
- Create a Part_Compound from the objects.
- Select the compound.
- Std_Export...
The curved handle(?) doesn't come out as it should for some reason though.
-
Attachments
-
- RGBEx4.dxf
- (32.42 KiB) Downloaded 8 times
-
thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
-
Contact:
Post
by thomas-neemann »
aduarte wrote: ↑Tue May 03, 2022 8:59 am
...
What I need is to export a flattened 3D view from a specific viewing direction to 2D DWG.
...
this is also possible, video follows
- Bildschirmfoto_2022-05-03_11-12-54.png (73.41 KiB) Viewed 605 times
- Bildschirmfoto_2022-05-03_11-19-23.png (17.46 KiB) Viewed 605 times