I performed a boolean operation with two parts. One of the parts disappears afterwards. I played around with some of the property functions and found "display mode body" under the property>view. I changed the option from "through" to "tip" and everything shows up. Can someone point me to the area of the manual that explains the property window or can someone explain to me about this operation please?
Thank you,
Dempsy...
OS: Windows 8.1
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.13522 (Git)
Build type: Release
Branch: releases/FreeCAD-0-17
Hash: 3bb5ff4e70c0c526f2d9dd69b1004155b2f527f2
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: English/UnitedStates (en_US)
After boolean operation, part disappears in part design
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: After boolean operation, part disappears in part design
First a link to the documentation about Display Mode Body => https://www.freecadweb.org/wiki/PartDes ... orkbenches
Then some general remarks :
Then some general remarks :
- Your FreeCAD version is quite outdated. The 0.18 release can be downloaded here
- You should post your file as your description is quite unclear. The boolean operation in PartDesign is used between an active body operation and another body. It should not be used between parts.
Re: After boolean operation, part disappears in part design
As far as I have seen it cannot be used with a part as second object.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.